Question on wood table
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=156958
Printed Date: 12 May 2024 at 2:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Question on wood table
Posted By: TMiller/NC
Subject: Question on wood table
Date Posted: 05 Jan 2019 at 5:38pm
|
I'm working on a small table for my Granddaughter and her Husband for their game room. The top is 24" X 30", I set in 1 1/4" from edge and ran a small route line on all sides, which I would like to be blue, for the LEO blue line, as they both are involved in police work. The question is what can I fill or color the route line with so it will show blue. Thanks...
|
Replies:
Posted By: CTuckerNWIL
Date Posted: 05 Jan 2019 at 5:53pm
|
Epoxy is the best answer I got. https://youtu.be/tDbifk_UayU" rel="nofollow - https://youtu.be/tDbifk_UayU ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: DiyDave
Date Posted: 05 Jan 2019 at 6:27pm
Cool video!
 |
CTuckerNWIL wrote:Posted By: Unit3
Date Posted: 06 Jan 2019 at 7:42pm
|
A dumb idea, but if the router line is not to deep or wide, could you fill it with paint? Sand it smooth and varnish over it? ------------- 2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C |
Posted By: shameless dude
Date Posted: 06 Jan 2019 at 11:45pm
| every time that dude cut that plank, I about …. |
Posted By: JC-WI
Date Posted: 07 Jan 2019 at 12:05am
|
[TUBE]tDbifk_UayU[/TUBE] ------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Posted By: thendrix
Date Posted: 07 Jan 2019 at 7:38am
|
That's really cool. Dudes got a nice shop and lots of toys ------------- "Farming is a business that makes a Las Vegas craps table look like a regular paycheck" Ronald Reagan |
Posted By: TMiller/NC
Date Posted: 07 Jan 2019 at 5:53pm
|
Unit 3, I think the paint idea is going to be the best bet for me. Bought some craft paint in a tube at Walmart, and did a test on a piece of scrap. Used "frog" tape on each side of route line, might take a couple of coats to fill, did not soak in, and is acrylic waterbased so will top coat with a waterbased clear. Thanks. |
Posted By: mdm1
Date Posted: 07 Jan 2019 at 5:57pm
|
If the paint leeches under the tape a little just sand the top again. Should be good to go! Post a pic when it's done. ------------- Everything is impossible until someone does it! WD45-trip loader 1947 c w/woods belly mower, 1939 B, #3 sickle mower 1944 B, 2 1948 G's. Misc other equipment that my wife calls JUNK! |