getting the temp gauge out of the block
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=156882
Printed Date: 23 Sep 2025 at 4:53am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: getting the temp gauge out of the block
Posted By: mike 44
Subject: getting the temp gauge out of the block
Date Posted: 02 Jan 2019 at 3:16am
| working on an old farmall h replacing the gauges and painting and decals, cant get the stud for the temp gauge outta the block. tried heating and no luck any ideas its some kinda on there thanks |
Replies:
Posted By: jaybmiller
Date Posted: 02 Jan 2019 at 6:26am
|
yeah, I gots one of them too..... still a 'work in progress' there's 2 kinds of sensors. one goes into a 'well' that's mtd in the block, the other just gets screwed into the block, usually with an adapter 'bushing'. One problem is that most aftermarket stuff is actually Metric, 'made' to fit Imperial.... You might win by putting a pipewrench on the 'nut' closest to the block. That way when the metal deforms the sensor will keep it reasonably intact. I'd try a quick,hard pull but not too far. Rust has 'sealed' the threads. IF it loosens, go back and forth a zillion times, if you try to just crank it out, the rust WILL rebind the pieces up solid again, maybe worse ! It's one of those ..gotta have patience and THINK before you act PITA jobs. Now if you want to practice...... come on up !  jay ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: DiyDave
Date Posted: 02 Jan 2019 at 5:24pm
|
You could try the wax trick. I grow tired of writing about it, so here's a video. Just remember, from experience, bees wax seems to work best... [TUBE]7qqMXXGgFQg[/TUBE]
|
Posted By: dawntreader74
Date Posted: 02 Jan 2019 at 5:37pm
| mite haft to split it to get the presser off to get it to turn out. |
Posted By: mike 44
Date Posted: 03 Jan 2019 at 12:19am
| I got it! thanks guys |
Posted By: dawntreader74
Date Posted: 03 Jan 2019 at 12:45am
| how did ya; get it to come out ? |
Posted By: jaybmiller
Date Posted: 03 Jan 2019 at 8:28am
|
ya HOW, and did you buy a lottery ticket !!??!! Jay ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: FloydKS
Date Posted: 03 Jan 2019 at 2:02pm
|
After asking a question and then saying you found the answer... ya gotta give us the answer.... inquiring minds want to know ------------- Holding a grudge is like taking poison and expecting the other person to die |