180 Allis frame and seat
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=156647
Printed Date: 23 Sep 2025 at 4:56pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 180 Allis frame and seat
Posted By: Roundman
Subject: 180 Allis frame and seat
Date Posted: 24 Dec 2018 at 5:18pm
| Looking for metal frame for seat and seat for a 180 Allis from transmission case up. |
Replies:
Posted By: Acdiesel
Date Posted: 24 Dec 2018 at 8:37pm
|
is a 190 the same. link: https://limaohio.craigslist.org/grd/d/pandora-allis-190-complete-seat-assembly/6749006594.html" rel="nofollow - allis 190 complete seat assembly  ------------- D19 Diesel,D17 Diesel SER.3 2-D14, 2-D15 SER.II WF/NF D15 SER.2 DIESEL D12 SER.I, D10 Ser.II 2-720'S D21 Ser. II Gmc,caterpillar I'm a pharmacist (farm assist) with a PHD (post hole digger) |
Posted By: PaulB
Date Posted: 25 Dec 2018 at 5:47am
|
I have what you want here in Maryland. You can have it if you come get it. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: DrAllis
Date Posted: 25 Dec 2018 at 6:41am
| The 190 track and seat suspension is the same as a 180, but still need the mounting bracket for a 180. |
Posted By: FREEDGUY
Date Posted: 25 Dec 2018 at 7:51am
| Is this the same 180 that had 3 point issues hitting the seat ?? |
Posted By: sparky
Date Posted: 25 Dec 2018 at 2:59pm
|
By the OP's title I'd say yes. ------------- It's the color tractor my grandpa had! |
Posted By: Roundman
Date Posted: 25 Dec 2018 at 4:46pm
| Yes it is. |
Posted By: Roundman
Date Posted: 25 Dec 2018 at 5:11pm
| Where can I find rods and bushing and rubber grommets to rebuild what I have. |
Posted By: DrAllis
Date Posted: 25 Dec 2018 at 5:21pm
| So, why was the seat getting smashed by the 3 point hitch ?? |
Posted By: FREEDGUY
Date Posted: 25 Dec 2018 at 5:28pm
| Apparently my first question was too subtle?? And like Doc asked, I might not replace the broken seat parts unless 3 point wasn't going to be used again or fixed. But, I am curios as to what the problem is/was because we run one and I want to keep an eye out for a potential issue. |
Posted By: KJCHRIS
Date Posted: 25 Dec 2018 at 7:24pm
|
Roundman, parts are available thru several venders on this site. DJS and Sandy Lake are 2 of them. Also still can order thru AGCO dlrs. ------------- AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B, |
Posted By: DSeries4
Date Posted: 26 Dec 2018 at 8:44am
The 4 white rollers that the seat assembly adjusts back and forth on are no longer available from ago. If yours as still good, you will have to reuse them. I had my local fab shop make new pins and bushings for my seat. But the vendors here are a good source as well. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
KJCHRIS wrote:Posted By: Roundman
Date Posted: 26 Dec 2018 at 4:55pm
| for some reason three point hits seat bracket and bends the main bracket that bolts to the transmission. |
Posted By: lentsch
Date Posted: 26 Dec 2018 at 5:19pm
|
I have an idea what might be going on, but gonna need a picture to confirm my suspicions. Have you owned this tractor long? ------------- WD,D15,190XT,7000,8010x2,7060,8070 |
Posted By: DrAllis
Date Posted: 27 Dec 2018 at 7:15am
| The cast iron top link bracket on the tractor could be on upside down, but I still think it's an implement issue with where the top link connects is too high. |
Posted By: DMiller
Date Posted: 27 Dec 2018 at 7:38am
I own a 180, 3 point never gets NEAR the seat, WTH could be wrong???
|
Posted By: bradley6874
Date Posted: 27 Dec 2018 at 8:15am
|
Catorgy 1 equipment on cat 2 tracctor with cat 1 top link in lowest hole on tractor wish origanl poster would pit picture on here otherwise we all just guessing ------------- You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul |
Posted By: sparky
Date Posted: 27 Dec 2018 at 12:09pm
|
Yes a picture! I don't know much but I do know it didn't leave the assembly plant bending up the seat bracket. ------------- It's the color tractor my grandpa had! |
Posted By: Roundman
Date Posted: 27 Dec 2018 at 12:36pm
| Yes around twenty years. |
Posted By: orangereborn
Date Posted: 27 Dec 2018 at 1:45pm
| For me it was the implement problem that made it hit the seat. I can't recall if it was the rear blade or the bale fork. So I just put the quick hitch on it and solved the problem..Dale |
Posted By: Roundman
Date Posted: 27 Dec 2018 at 10:54pm
| Sorry it isn't the three point that is hitting seat frame it is the top link. |
Posted By: Roundman
Date Posted: 27 Dec 2018 at 10:56pm
| Bale fork |
Posted By: orangereborn
Date Posted: 28 Dec 2018 at 9:15am
| Understood...It was the adding of the quick hitch that eliminated the link from hitting the seat...Dale |
Posted By: Roundman
Date Posted: 28 Dec 2018 at 3:07pm
| Thanks to all for the help. |
Posted By: Roundman
Date Posted: 29 Dec 2018 at 6:43pm
| Thanks used Sandylake very helpful Thanks |
Posted By: Roundman
Date Posted: 04 Jan 2019 at 6:52pm
|
I have a 180 Allis. what should the top link length be. |
Posted By: KJCHRIS
Date Posted: 05 Jan 2019 at 7:14pm
|
The Cat II top links we've used for 40+ years measure about 21" to 27" extended, this is measuring center to center on pins. We've almost always used the top hole on tractor and top or middle on implements. Measured length on blade is 24" and the bale carrier is 23.5" . Top link is a long ways from the seat. ------------- AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B, |
Posted By: bradley6874
Date Posted: 05 Jan 2019 at 7:25pm
|
If a quick with fixed it and that's all you changed then ist deff equipment related ------------- You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul |
Posted By: Roundman
Date Posted: 06 Jan 2019 at 3:35pm
|
Thanks |