Draper questions,or F H draper???
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=155506
Printed Date: 22 Aug 2025 at 6:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Draper questions,or F H draper???
Posted By: Mikez
Subject: Draper questions,or F H draper???
Date Posted: 10 Nov 2018 at 3:54pm
|
Few different questions. Look down at last few posts for updated question. Thanks Sadly we found the storage van had leaked and these two drapers are deteriorated on the bottoms. This one is 525867     Think this is any good for anything. I don't have a part number for this next one     What's this one fit does anybody know the part number. This one measures about 35" wideX like about 97"long anybody know what it fits Anybody interested in them. Thanks |
Replies:
Posted By: CrestonM
Date Posted: 10 Nov 2018 at 7:59pm
| Looks like they fit an All-Crop 60/66. |
Posted By: DrAllis
Date Posted: 10 Nov 2018 at 10:43pm
| 36 to 40 inches wide would mean a model "40".... |
Posted By: CrestonM
Date Posted: 11 Nov 2018 at 11:53am
|
The good Dr has a point. I didn’t see any measurements, but looking at the photos again, they very well could be for a 40. Seeing the triangle logo made me think 60/66, because I read somewhere (Wendel’s book maybe?) that parts service for the 40 was discontinued in 1963, but that source could’ve been wrong. |
Posted By: Mikez
Date Posted: 11 Nov 2018 at 2:38pm
| There's two different drapers there. Top one is for a 60/66 part number 525867 the bottom one is the one that's no part numbers and its narrower, about 36/40 in like dr said. Sorry I didn't measure it. Thanks guys |
Posted By: Mikez
Date Posted: 13 Nov 2018 at 10:41am
| Btt for alen to see |
Posted By: Mikez
Date Posted: 15 Nov 2018 at 6:47pm
| Anybody interested in these. |
Posted By: BART
Date Posted: 18 Nov 2018 at 3:21pm
| I would like the narrow one if it is for a moled 40. Thanks bart |
Posted By: Mikez
Date Posted: 18 Nov 2018 at 7:56pm
| Ok will get it out and measure it to be sure |
Posted By: Mikez
Date Posted: 20 Feb 2019 at 6:54pm
|
The draper that we can't read part number measures about 35" wide X about like over all 97" long anybody know what it fits. Thanks |
Posted By: CrestonM
Date Posted: 20 Feb 2019 at 7:21pm
| I would guess either a 40 or a forage harvester, but I've never been around a forage harvester. |
Posted By: Mikez
Date Posted: 20 Feb 2019 at 7:42pm
| Oh yea chreston good thinking. Just looking in parts book, grass attachment draper used prior to No. G-6604. Looks similar but doesn't give measurements. Anybody know that measures |
Posted By: victoryallis
Date Posted: 20 Feb 2019 at 8:36pm
|
Guessing they don’t fit a 9250? ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
Posted By: Mikez
Date Posted: 24 Feb 2019 at 11:41am
|
Anybody have the older grass head that knows the measurements Thanks |
Posted By: Mikez
Date Posted: 27 Feb 2019 at 6:08pm
| In the parts book for the forage harvester, the draper used prior to no. G-6604. That looks like it but no measurements. Does anybody have the measurements or does anybody know how many screws holding the slat down to draper on the 40 |
Posted By: CrestonM
Date Posted: 27 Feb 2019 at 6:14pm
| Someone here has to have a 40 or forage harvester they can measure off of... |
Posted By: BART
Date Posted: 28 Feb 2019 at 1:44pm
| I sent my measurments to Mikez Hope he got them Bart |