Need H3 Dozer Breather Cap Assy (P/N 234763)
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=155394
Printed Date: 28 Apr 2024 at 4:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Need H3 Dozer Breather Cap Assy (P/N 234763)
Posted By: tmd42024
Subject: Need H3 Dozer Breather Cap Assy (P/N 234763)
Date Posted: 06 Nov 2018 at 8:34pm
|
I'm looking for a hydraulic breather cap assy - part number 234763. I called Sandy Lake to see if they had one. Unfortunately, they didn't have one and couldn't suggest a place to find one. Sandy Lake did indicate that it is the same as the one that is on the D15 or D21 tractor. Does anyone have some suggestions where I might find one? As for the size, it's a relatively small cap. I should mention that the dozer that I have never had one on it when I purchased it. (It was a project dozer.) Worst case, I'll have to make something up. Although, it would be my preference to find the right cap for it. Thanks in advance for your help!  |
Replies:
Posted By: DMiller
Date Posted: 07 Nov 2018 at 6:50am
| Is this a mushroom top that quarter turn locks on with spring clips? |
Posted By: tmd42024
Date Posted: 07 Nov 2018 at 6:35pm
| It could be - as I have never seen what it actually looks like. It was missing when I purchased the H3. The size of it looks about the same as the hydraulic oil fill cap with dipstick on the other side of the dozer. |
Posted By: DMiller
Date Posted: 07 Nov 2018 at 6:42pm
| Could suggest trying the fill cap/dipstick to see if will even fit if the tube will allow it. If does those style caps/sticks are on most of our tractors and should be in the salvage lots where could just remove the stick. |
Posted By: tmd42024
Date Posted: 07 Nov 2018 at 6:56pm
| thanks for the info! |
Posted By: DiyDave
Date Posted: 07 Nov 2018 at 8:42pm
|
Look like this? https://www.surpluscenter.com/Hydraulics/Hydraulic-Filters/Breathers/1-1-2-Push-On-Breather-Cap-9-8285.axd" rel="nofollow - https://www.surpluscenter.com/Hydraulics/Hydraulic-Filters/Breathers/1-1-2-Push-On-Breather-Cap-9-8285.axd
|
Posted By: tmd42024
Date Posted: 08 Nov 2018 at 8:14pm
|
A push type breather might work - although, it has a flange on it that is configured like the hydraulic fill side. This is a bit frustrating in that I have never seen one; and, I can't find a picture of it on line. I only have the part number that is referenced in the H3 parts manual.
Thanks for your help - |
Posted By: DMiller
Date Posted: 09 Nov 2018 at 5:41am
| That is why I referenced the cap style dipstick vent. |
Posted By: tmd42024
Date Posted: 11 Nov 2018 at 11:17am
|
FYI - I checked and the cap with the Dipstick for the hydraulic fluid fits perfectly on the breather side. I think I know how to fix this - Thanks!  |