Farm Equipment - Allis G engine rebuild.

Print Page | Close Window

Allis G engine rebuild.

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=155249
Printed Date: 01 Oct 2025 at 9:11am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis G engine rebuild.

Posted By: hinzec
Subject: Allis G engine rebuild.
Date Posted: 01 Nov 2018 at 10:21pm

I am trying to reassemble an Allis G engine. I am have trouble figuring out the brass thrust washers on the crank. When we disassembled we only found one partial washer in the oil pan. I see the outer washer is held in place by pins. What holds the inner one from spinning? There are no pins, or holes where there should be pins. I also may be in need of the crank gear, the oil slinger, steel shims and the steel thrust plate.

Thanks in advance for any help anyone can provide.

Replies:

Posted By: Gerald J.
Date Posted: 01 Nov 2018 at 11:11pm

The shop manual may help.

http://geraldj.networkiowa.com/Trees/Allis-Chalmers-G-B-C-CA-Service.pdf" rel="nofollow - http://geraldj.networkiowa.com/Trees/Allis-Chalmers-G-B-C-CA-Service.pdf

Gerald J.

Posted By: hinzec
Date Posted: 02 Nov 2018 at 7:52pm

Thanks Gerald it sure will.