Farm Equipment - throttle linkage/steering rod fix

Print Page | Close Window

throttle linkage/steering rod fix

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=15445
Printed Date: 23 May 2024 at 5:28am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: throttle linkage/steering rod fix

Posted By: Jeff(WC)(MI)
Subject: throttle linkage/steering rod fix
Date Posted: 19 Jul 2010 at 8:37pm

I have a lot of slip in the ends of the throttle linkages on both my wc and wd45...how do you guys fix these? weld em up and grind em down and drill new holes?

also on the wd45 it has a LOT of slop where the steering shaft goes into the u-joint...if the wear is on the actual shaft how do you fix this short of finding another shaft, since mine has been cut and a char-lynn PS unit has been added to it....but since i have the PS i can;t feel the slop so the tractor does the wanders down the road

Replies:

Posted By: Dave A
Date Posted: 19 Jul 2010 at 9:42pm

drill it linkage larger and put a bushing in it. JB weld or Bellzona the shaft

-------------
Play the game for more than you can afford to lose... only then will you learn the game.
Winston Churchill