Snap coupler dimension variations
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=154312
Printed Date: 14 Aug 2025 at 3:59pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Snap coupler dimension variations
Posted By: 59f100292
Subject: Snap coupler dimension variations
Date Posted: 26 Sep 2018 at 2:17pm
|
I have read there are variations in both lift arm width, and tongue length dimensions through the spectrum of CA to D series snap couplers. Would a post hole digger off a D-17 fit on a WD?
|
Replies:
Posted By: brkfldj
Date Posted: 26 Sep 2018 at 9:22pm
I don't know the answer, but I bet you could pm IBWD MIke and learn a quick answer. He had a post on 6/11/18 that causes me to think he will have many answers about snap coupler interchangability.
Jim
|
Posted By: JC-WI
Date Posted: 26 Sep 2018 at 9:26pm
yes
-------------
He who says there is no evil has already deceived himself
The truth is the truth, sugar coated or not. Trawler II says, "Remember that."
|
Posted By: wfmurray
Date Posted: 27 Sep 2018 at 8:49am
|
We put a rippper for a C A on D 14.Had to add 10 inches to beam and rework lift arms . Worked out good.
|
Posted By: Tracy Martin TN
Date Posted: 27 Sep 2018 at 9:39am
Depends on the model. The #10 you will need a different bracket that bolts to drawbar bracket. HTH Tracy
-------------
No greater gift than healthy grandkids!
|
Posted By: 59f100292
Date Posted: 28 Sep 2018 at 10:39am
On a related note, I’ve got a 6ft rear blade that doesn’t fit the WD, as the lift arms are about 3” too narrow for the tractor’s lift arms (27.5” on the blade, 30.5” on the tractor). Is it safe to assume the blade was made for a CA snap coupler? Would it fit anything else? D-10/12? Not sure yet if I will try to modify it to make it work or sell/trade it. Want to advertise it correctly if I’m going to sell it.
|
|