Allis B 3 pt hitch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=154129
Printed Date: 24 Sep 2025 at 2:21am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis B 3 pt hitch
Posted By: TMiller/NC
Subject: Allis B 3 pt hitch
Date Posted: 19 Sep 2018 at 6:57pm
|
Just wondering why the 3 point hitch system I see offered mount to the draw bar. I am undertaking making one that mounts on the final drives slightly in front of the center. Hopefully I can get a picture of the first of the mount posted.   |
Replies:
Posted By: AaronSEIA
Date Posted: 19 Sep 2018 at 7:19pm
|
Probably cheaper and easier to build and mount for the average guy. AaronSEIA
|
Posted By: CrestonM
Date Posted: 19 Sep 2018 at 7:27pm
|
I like your design better. Like a true 3pt tractor, it puts the mounting point under the axle. I don't know what you're going to do for sway control (if anything), but I highly suggest getting a set of sway bars for a Ford tractor from the N through -01 series tractors and adapting the 3pt system to accept them. I know it's Ford, but this system can hardly be beaten. No parts to rust up, no turnbuckles to mess with, and it will always hold your implement rock solid. Makes it really nice for mowing, especially.
|
Posted By: TMiller/NC
Date Posted: 19 Sep 2018 at 7:54pm
|
Creston, in the top pic there is a piece of flat bar tacked on, that is where the sway bar will attach, haven't decided what to use for sway bar. |
Posted By: TMiller/NC
Date Posted: 20 Sep 2018 at 5:24pm
|
A little more progress  |
Posted By: TMiller/NC
Date Posted: 20 Sep 2018 at 5:26pm
|
Posted By: wfmurray
Date Posted: 20 Sep 2018 at 9:54pm
| Made one for my B.There is more to a three point hitch than meets the eye.That third link is a handful .You will find you can not put third link forward enough with bottom link that for forward .Mine works good with finish mower but never could get adjusted for a plow .Length of arm and position of pivot is what makes it work.You can see mine under customized B on this post. Wish you a lot of luck. |