How many 3 point D10-D12-D15?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=154042
Printed Date: 29 Apr 2024 at 8:40am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: How many 3 point D10-D12-D15?
Posted By: Tracy Martin TN
Subject: How many 3 point D10-D12-D15?
Date Posted: 16 Sep 2018 at 8:15pm
|
How many guys running factory 3 point on D10-12 and D15's? Just curious to how many out there. Thanks Tracy ------------- No greater gift than healthy grandkids! |
Replies:
Posted By: Dusty MI
Date Posted: 16 Sep 2018 at 8:30pm
|
My D10 is a series III which has a factory 3 point. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: DSeries4
Date Posted: 16 Sep 2018 at 8:55pm
|
Got one on my D15 II. Found an original top link for it a few years ago. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: rodnil
Date Posted: 16 Sep 2018 at 9:09pm
| I have a D -12 , serial # 9002 and it has the three point. I also have two D-15's series II one with snap coupler and one with three point. |
Posted By: Marlyn nwia
Date Posted: 16 Sep 2018 at 9:13pm
| I have a D12 III and a D15 II ; both have factory 3 pt |
Posted By: allisrutledge
Date Posted: 16 Sep 2018 at 9:43pm
|
I got a D10 II with factory 3pt. Had it around 30 yrs and it wants a new engine this year, I will try to grant its wish. Scott ------------- Allis Chalmers still exist in my mind and barns |
Posted By: DiyDave
Date Posted: 17 Sep 2018 at 4:43am
| I gots 2 (10, 12)... |
Posted By: Calvin Schmidt
Date Posted: 17 Sep 2018 at 6:05am
|
D12 III, D15 II , D17IV, D19, all 3 pt. ------------- Nothing is impossible if it is properly financed |
Posted By: TimNearFortWorth
Date Posted: 17 Sep 2018 at 6:08am
|
One 12, two D15II's. Not much difference in the overall "heft" on the entire hitch assy. between the D12 and 15II units. SC units get the most use for me, OEM A-C 3-pt. adapters used for moving round bales, brush cutter, etc.
|
Posted By: Butch(OH)
Date Posted: 17 Sep 2018 at 6:19am
|
D-15II here |
Posted By: Gary Burnett
Date Posted: 17 Sep 2018 at 6:34am
|
Think the percentage of 3pt hitch tractors of those models has steadily increased over the years because the tractors with 3pt were more useful to more people so it was the ones with snap coupler that got scrapped out quicker.
|
Posted By: Charlie175
Date Posted: 17 Sep 2018 at 7:44am
|
I think most Series II D10/12 and D15's were 3 point. Mid-60's A-C saw the light and went to 3-point. ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Ranse
Date Posted: 17 Sep 2018 at 7:50am
| Mine is a Series II with factory 3pt. |
Posted By: Pat the Plumber CIL
Date Posted: 17 Sep 2018 at 12:35pm
|
D-15 Ser II with factory 3 pt. Wish it was stouter and does anyone know where to find the clips that hold the 3pt pieces on the end of the arms. One of mine is held on with # 9 wire. ------------- You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails 1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF. |
Posted By: ACinSC
Date Posted: 17 Sep 2018 at 1:42pm
| We have 2 Series 1 D 15s . Both have 3 point hitchs that slide in the snap coupler . One does have a homemade top link bracket . Is that how you tell if it's a factory hitch ?? |
Posted By: Tracy Martin TN
Date Posted: 17 Sep 2018 at 1:57pm
------------- No greater gift than healthy grandkids! |
ACinSC wrote:Posted By: WD45
Date Posted: 17 Sep 2018 at 2:47pm
|
I have a D10 Series III factory 3 pt D15 series II factory 3 pt D17 series IV diesel factory 3 pt D21 has 3 pt ------------- Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H |
Posted By: LYNNMN
Date Posted: 17 Sep 2018 at 5:28pm
|
I have a series 1 D10 with factory 3 point Lynn
|
Posted By: EPALLIS
Date Posted: 17 Sep 2018 at 9:03pm
| Another D-15 Series II factory 3 point here with a Paulson Loader... |
Posted By: ACinSC
Date Posted: 18 Sep 2018 at 7:56am
| Alvin ? Can someone post a picture of a factory 3 point ? We may very well have a factory conversion . Just wondering , Thanks !! |
Posted By: DSpears N IL
Date Posted: 18 Sep 2018 at 8:06pm
|
This is a photo of my factory 3 point with a drawbar added . DeWayne  |
Posted By: ACinSC
Date Posted: 19 Sep 2018 at 6:18am
| Thanks Dewayne. That's a lot different than what we have . |
Posted By: Charlie175
Date Posted: 19 Sep 2018 at 8:07am
D10 Rear D12 Rear  ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Unit3
Date Posted: 19 Sep 2018 at 8:30am
|
Finally some pictures! Love the factory top link! You don't see them very often. ------------- 2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C |
Posted By: L Karg
Date Posted: 19 Sep 2018 at 8:46am
| 2 D-10’s. 2 D-12’s 1 I 4O and one lndustirial D 12 |
Posted By: snowman(MI)
Date Posted: 20 Sep 2018 at 1:48am
|
1966 D10 Series 3 with factory 3 point 1966 D15 Series 2 with factory 3 point ------------- 1950 WD, 1966 D-10 III, 1961 D-10 II, 1966 D-15 II Gas, A-C Minibike, 917 Hydro Mower, 917 Hydro Blower w/cab, West Michigan "Allis Express" |
Posted By: DEP5
Date Posted: 28 Oct 2018 at 1:34pm
|
1965 D10 (#9057)
Series III factory 3 pt, fully optioned
 ------------- D10 Series III, fully optioned |
Posted By: WD45
Date Posted: 28 Oct 2018 at 4:02pm
|
We have a D10 series iII with factory 3 pt and a D15 series iI with factory 3 pt Also a D17 Series IV diesel with factory 3 pt. ------------- Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H |
Posted By: DennisA (IL)
Date Posted: 28 Oct 2018 at 8:33pm
|
I have a series II D-15 ------------- Thanks & God Bless Dennis |
Posted By: Acdiesel
Date Posted: 29 Oct 2018 at 11:01am
|
D15 SERIES II DAN ------------- D19 diesel,D17 diesel SER.3 D14 NF,D14 WF, D15 SER.II wf D15 SER.2 DIESEL,D15 ser.II nf D12 SER.I, D10 Ser.II 2-720'S Gmc,caterpillar I'm a pharmacist (farm assist) with a PHD (post hole digger) |
Posted By: Tracy Martin TN
Date Posted: 29 Oct 2018 at 11:46am
|
How many would be interested in a 3 point stabilizer bracket similar to the Ford tractors? Thanks Tracy ------------- No greater gift than healthy grandkids! |
Posted By: Leadoff
Date Posted: 30 Oct 2018 at 12:29am
|
1965 D15 Series II with factory Three Point Hitch c/w the factory Top Link ------------- 1963 D17D Series III. 1965 D15 Series II. 1965 D17 Series IV. 1975 185. 1978 716H. 1979 716H. 1965 780 Harvester/1R&DC. 1957 Model 73 SC 4 Furrow Plow |