7000 series Pre-cut floor mat: who's is best?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=153785
Printed Date: 19 Oct 2025 at 9:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7000 series Pre-cut floor mat: who's is best?
Posted By: GM Guy
Subject: 7000 series Pre-cut floor mat: who's is best?
Date Posted: 08 Sep 2018 at 2:00am
|
Hey all, Just as the title says, trying to find the best quality floor mat I can for the 7040. Thanks! ------------- Gleaner: the properly engineered and built combine. If you need parts for your Gleaner, we are parting out A's through L2's, so we may be able to help. |
Replies:
Posted By: Michael V (NM)
Date Posted: 08 Sep 2018 at 8:02am
| I got one from Shoup...if ya have a PD, and maroon belly, you'll hafta cut the holes for them... |
Posted By: injpumpEd
Date Posted: 08 Sep 2018 at 8:39am
|
who has them for open station maroon chassis PD tractors? ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Posted By: DSeries4
Date Posted: 08 Sep 2018 at 9:49am
|
Check with Fehr cab interiors. I just got a cab kit for my 6080 and it looks amazing. They do floor mats as well. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: plummerscarin
Date Posted: 08 Sep 2018 at 6:00pm
| Got a floor mat from through All State Ag Parts. Very happy with the fit but as stated above, will have to cut holes for power direct. They called it a jute backing but really just thick rubber molded to the mat. |
Posted By: DaveWisc.
Date Posted: 08 Sep 2018 at 7:13pm
| How about a D21 |
Posted By: GM Guy
Date Posted: 09 Sep 2018 at 3:44pm
Good question, I would like to know that as well, as I have a 7030 that will likely return to factory open station status at some point. That point will likely be when I get a shed to put it in, although its an early unit with the open station only linkage rather than cable controls so a little weather probably wouldnt hurt it. ------------- Gleaner: the properly engineered and built combine. If you need parts for your Gleaner, we are parting out A's through L2's, so we may be able to help. |
injpumpEd wrote:Posted By: Orange Blood
Date Posted: 09 Sep 2018 at 8:44pm
D21 to my knowledge never had a floor mat from the factory, so unlikely anyone is reproducing what never existed. The D21 was pretty much always an open station tractor from Allis, all cabs that I know of where aftermarket. ------------- Still in use: HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060 Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7 |
Posted By: acnh210
Date Posted: 09 Sep 2018 at 9:41pm
|
I recommend the Hycapacity brand. Its a thick foam. power director holes are 1/2 cut out. Just finish punching them out. I put one in eleven years ago. It still looks new, minus the grit and grime. ------------- Terra Tiger, WD, 7040ps, 8050 with westendorf loader, 8050ps fwa. |
Posted By: AC7060IL
Date Posted: 10 Sep 2018 at 9:20am
I've used Fehr for several gleaner cab kits & like them. Their floor mats were 1/2" thick dense foam fused/glued to a 1/8" durable rubber matting. Good folks to work with in Fairbury, IL. Here's their weblink http://www.fehrcab.com" rel="nofollow - http://www.fehrcab.com |