Farm Equipment - Switching RWA from F2

Print Page | Close Window

Switching RWA from F2 - F3

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=153604
Printed Date: 23 Aug 2025 at 9:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Switching RWA from F2 - F3

Posted By: wekracer
Subject: Switching RWA from F2 - F3
Date Posted: 02 Sep 2018 at 1:32pm

We have had an F2 for about 15 years with a Gilcrest RWA and recently picked up a nice F3. I’m getting ready to swap rear axels and noticed the hydro is different on the F3. I’m wondering which ports to hook the RWA to. Also wondering where to run the case drain. Our L3 RWA looks similar to the F3 hydro but it’s case drain runs to the resuavor

I plan on calling gilcrest on Tuesday but any help would be appreciated. I assume my axel will work on either machine

Replies:

Posted By: DrAllis
Date Posted: 02 Sep 2018 at 10:47pm

Case drain should wind up going to the hydraulic tank. If it was mine, it would go thru a small hydraulic filter base and then to the tank, to be sure nothing ever contaminates the hydraulic system.