500 loader
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=153169
Printed Date: 01 Jun 2025 at 4:00am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 500 loader
Posted By: orangereborn
Subject: 500 loader
Date Posted: 19 Aug 2018 at 1:33pm
| Some time back there was a discussion about cylinder seal/packing kits for the 500 loaders. Can someone update me. Was that Baum that had kits? Thanks....Dale |
Replies:
Posted By: den/southern illinoi
Date Posted: 19 Aug 2018 at 3:00pm
|
Dale, I do not know about that discussion but Baum can pretty much help on any parts for rams. I've even sent ends to them when we could not figure out what I needed. Phone # is 800-642-9333. All I can say is it's not often it seems like you need help. LOL Den ------------- Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts. |
Posted By: 185turbo
Date Posted: 19 Aug 2018 at 3:19pm
|
I bet baum has them . Pretty sure you can still get them from agco as well. ------------- 185 turbocharged w/ 500 loader , WD |
Posted By: SteveMaskey(MO)
Date Posted: 19 Aug 2018 at 3:40pm
| I have 2 500 loaders and when I need repairs I just take it apart and take orings and seal to local hydraulic shop and they match it up. Much cheaper than buying kits |
Posted By: Leon B MO
Date Posted: 19 Aug 2018 at 4:20pm
|
As Steve said, I rebuilt 1 bucket cylinder and a main lift cyl last winter for $100 worth of parts from local shop. Leon B MO ------------- Uncle always said "Fill the back of the shovel and the front will take care of itself". |
Posted By: orangereborn
Date Posted: 19 Aug 2018 at 9:40pm
| Dennis...Thanks...But that is because the right people let me hang with them...The scary part is I was involved in the conversation and had seen those Baum kits. Leon/Steve...Does the 500 on a 180 have bigger lift cylinders {2.5} like what is used on the 7000. Parts for the 517 and 519 interchange with the 400 Series....Thanks...Dale |
Posted By: Leon B MO
Date Posted: 20 Aug 2018 at 7:02am
|
Can't say for sure if the 500 cyl will interchange with other series, I do know there are different length cyl for them. We have 2 500 loaders and one is about 8" longer and the posts are taller. Both mounted on XT'sLeon B Mo ------------- Uncle always said "Fill the back of the shovel and the front will take care of itself". |
Posted By: SteveMaskey(MO)
Date Posted: 20 Aug 2018 at 12:32pm
| Both of my loaders are the same bucket and lift 1.5” shaft maybe 2” bore? I don’t have one apart to get a accurate measurement |
Posted By: chalmera
Date Posted: 20 Aug 2018 at 8:38pm
|
What about rebuolding the spools? |
Posted By: SteveMaskey(MO)
Date Posted: 20 Aug 2018 at 9:04pm
| Chalmera, the loaders I have run off the tractor hydraulics they don’t have their own valve |
Posted By: Nathan (SD)
Date Posted: 21 Aug 2018 at 10:47pm
https://www.allischalmers.com/forum/tilt-cylinder-500-series-loader_topic145098_post1202146.html?KW=#1202146" rel="nofollow - https://www.allischalmers.com/forum/tilt-cylinder-500-series-loader_topic145098_post1202146.html?KW=#1202146 |
orangereborn wrote:Posted By: orangereborn
Date Posted: 21 Aug 2018 at 11:48pm
Nathan...I thought is may have been you. Thanks for jumping in and bailing me out...I know I had it saved..Now I will have it saved in two places...Dale
|