Print Page | Close Window

Starter on a b

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=153055
Printed Date: 06 Nov 2025 at 5:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Starter on a b
Posted By: lowell
Subject: Starter on a b
Date Posted: 15 Aug 2018 at 3:18pm
Can a guy put a starter on a b That did not come with one do you have to get a driffent flywheel or can you put one on the flywheel that is on it thanks



Replies:
Posted By: AaronSEIA
Date Posted: 15 Aug 2018 at 6:56pm
You would need the flywheel, clutch, and torque tube with the starter hole.  Plus the battery box and cut down tool box.  If your block isn't drilled for the generator, you'd need a battery charger a couple times a year.
AaronSEIA


Posted By: lowell
Date Posted: 15 Aug 2018 at 7:09pm
Ok thanks


Posted By: Dakota Dave
Date Posted: 15 Aug 2018 at 8:47pm
What year is it my war time C had the flywheel with ring gear and starter hole in the torque tube. Just no starter generator or PTO.


Posted By: lowell
Date Posted: 15 Aug 2018 at 9:28pm
I thought he said it was a 1939 will have to check next time I'm over there


Posted By: Dakota Dave
Date Posted: 15 Aug 2018 at 10:10pm
39 dosent have a starter hole in the torque tube. No gen mount bosses on block no ring gear on fly wheel.


Posted By: lowell
Date Posted: 15 Aug 2018 at 10:12pm
Thanks


Posted By: lowell
Date Posted: 16 Aug 2018 at 11:52am
So what would it cost for a tube and flywheel


Posted By: BEK
Date Posted: 16 Aug 2018 at 2:06pm
In the long run it might be more cost effective (and easier) to purchase another late model B with a starter. Then sell your hand crank only B to recover some, if not all of your expenses.

Either way, good luck with your project.


Posted By: lowell
Date Posted: 16 Aug 2018 at 2:36pm
The motor is out so be just to see how much the parts are little more work


Posted By: Lon(MN)
Date Posted: 16 Aug 2018 at 6:35pm
I have the parts you are looking for. Located in Elk River MN lselkriver@gmail.com


Posted By: lowell
Date Posted: 16 Aug 2018 at 6:59pm
Thanks I will keep you in mind trying to find some one closer to me found couple yards by me thanks



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net