Print Page | Close Window

looking for hd 9 parts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=152772
Printed Date: 21 Aug 2025 at 6:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: looking for hd 9 parts
Posted By: jorstad brothers
Subject: looking for hd 9 parts
Date Posted: 05 Aug 2018 at 10:09pm
just acquired a hd9b ag, some one sold the rad for scrap. also looking for a clutch input shaft. thanks 

-------------
remember plunder than burn



Replies:
Posted By: gemdozer
Date Posted: 06 Aug 2018 at 5:24am
Let me hav the input shaft part number should have one but no rad


Posted By: DMiller
Date Posted: 06 Aug 2018 at 5:34am
May try Zimmerman in Versailles MO on the Radiator or maybe General Gear Idaho.


Posted By: jorstad brothers
Date Posted: 06 Aug 2018 at 11:23am
083091 is the clutch shaft. I will also need the bearing holders, in other words the complete assembly. That goes in the bellhousing thanks.

-------------
remember plunder than burn


Posted By: gemdozer
Date Posted: 06 Aug 2018 at 12:36pm
I have the cluch shaft 083091 and let have the bearing parts number and these bearings are for yoke block sliding or for the 2 small shafts.


Posted By: jorstad brothers
Date Posted: 06 Aug 2018 at 10:00pm
050579 disk brake
083121 retainer clutch shaft bearing
042847 ball bearing clutch shaft
030123 washer locking
030107 nut clutch shaft
051597 cap rear bearing
 these are the numbers for what im missing.



-------------
remember plunder than burn



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net