Farm Equipment - 190XT Gas

Print Page | Close Window

190XT Gas

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=152582
Printed Date: 31 Oct 2025 at 5:41am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190XT Gas

Posted By: 190XTLP
Subject: 190XT Gas
Date Posted: 30 Jul 2018 at 12:44pm

Engine runs perfect except for a bad governor hunt at mid speed
Has been adjusted per service book...bad spring?
Any ideas?

-------------
WD45G,WD45D.190XTD,190XTLP

D19LP,WC unstyled,WF unstyled

WC styled,220

Replies:

Posted By: john(MI)
Date Posted: 30 Jul 2018 at 1:12pm

I have never seen a 190's governor setup but on the 45 and D14 I have, the linkage was the problem. Especially across the front of the engine. I sprayed the linkage system with PB Blaster a couple times, then lubed with a silicon spray lube. Hope that helps, good luck.

-------------
D14, D17, 5020, 612H, CASE 446

Posted By: SteveMaskey(MO)
Date Posted: 30 Jul 2018 at 7:16pm

Make sure the throttle shaft ear where the linkage hooks up on the carb has not come loose. I have had that happen twice and will make the governor hunt as you describe.