190XT oil pressure gauge install
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=151785
Printed Date: 01 Jun 2025 at 5:20am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190XT oil pressure gauge install
Posted By: AC720Man
Subject: 190XT oil pressure gauge install
Date Posted: 04 Jul 2018 at 11:16am
Had a scare 2 weeks ago when the red low oil pressure light come on after baling 620 bales of hay. Come to find out the sending unit went bad. So I ordered a few parts and made up a kit. Very happy how it turned out. Gauge is easily seen from the seat and adds a peace of mind when the sending unit bites the dust again.      ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Replies:
Posted By: Red Bank
Date Posted: 04 Jul 2018 at 2:00pm
| Nice looking gauge setup and nice looking tractor glad you did the hard line for oil supply to the gauge really looks good |
Posted By: AC720Man
Date Posted: 04 Jul 2018 at 3:43pm
|
Thanks Red Bank, less than $70 in it including the AC gauge even though its after market. I decided to keep my series II dash panel stock. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: calico190xt68
Date Posted: 05 Jul 2018 at 7:42am
|
Looks good and very nice. Thanks for posting the pictures of this install and parts. I want to do the same thing. ------------- 80 7010, 80 7020. 67 190XTD Series I w/500 Loader, AC 2000 Plow, AC 4 row Planter, AC 77G Rake, Member Indiana A-C Partners, Member TAC |
Posted By: Dakota Dave
Date Posted: 05 Jul 2018 at 7:55pm
| You could have mounted the pod to the side of the dash pod. I've found a oil pressure guage down by my foot is like having no guage.d |
Posted By: AC720Man
Date Posted: 05 Jul 2018 at 8:13pm
|
Parts list: Allis Chalmers D-19 oil pressure gauge, 0-80 psi. Sandy Lake Imp is where I got mine. After market but seams to be good quality. Glow Shift metal gauge pod. GS-U01B. Inexpensive with free shipping, $12.99. Deep pod is required because this is a mechanical gauge and the pod has no rear exit. Other pods do but this allowed for a cleaner look due to the side exit of this model. 1-piece of 2”x 3 1/4”x 1/8” metal to mount gauge. Required to give height so my tool box opens. You wont need this if you dont have a tool box. 2 1/16”x 1 7/8”x 3/32” o-ring. Found it in the faucet section of hardware store. Slides over the gauge body, reduces vibration between the gauge face and metal pod. 2 ea- asst coupling nuts, #351. 2 ea- machine screws, 10-32x3/4. Copper tube gauge kit. $10.99 at Advance auto. 1/8” copper tee 1/8” copper 45 degree fitting. Hope I haven’t missed anything. Very easy install and I think it looks pretty clean. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 06 Jul 2018 at 5:36am
|
As far as location, the gauge could be placed in many locations. This is just where I installled it. I am always looking forward and down when working crops. Also trying to limit the originality of the XT ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: Gary Burnett
Date Posted: 06 Jul 2018 at 5:53am
|
Good idea nice job |
Posted By: AC720Man
Date Posted: 06 Jul 2018 at 7:43pm
|
Gary, do you have any good 10.00x16 front wheels for my XT laying around? ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 07 Jul 2018 at 6:44am
|
Or is it 8x15 that were on the front of a 200? ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: Ky.Allis
Date Posted: 07 Jul 2018 at 8:40am
| My 200 came new and still has 9.5L-15 on the front. I use the 4 rib design and really like them. |
Posted By: Gary Burnett
Date Posted: 07 Jul 2018 at 2:10pm
I have 9.5L X 15 tires on the front of my 185.I think New Holland round baler rims will work and they are very heavy duty.
|
AC720Man wrote: