Construction and other equipment - Need help...early style gov-injector rod linkage

Print Page | Close Window

Need help...early style gov-injector rod linkage

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=151589
Printed Date: 21 Aug 2025 at 8:07pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Need help...early style gov-injector rod linkage

Posted By: JamieH
Subject: Need help...early style gov-injector rod linkage
Date Posted: 26 Jun 2018 at 4:15pm

Need help locating the linkage rod from the governor to the fuel injector control arm...it's an early style 2-71 on a 49 hd5...thank you for any guidance

Replies:

Posted By: gemdozer
Date Posted: 27 Jun 2018 at 3:16pm

I have the fine rod connect in governor to the control injector with adjustement piece and she is approximatif 10 inch longue

Posted By: JamieH
Date Posted: 28 Jun 2018 at 12:57am

I believe that would be it...according to the parts catalog the part number would be 5154414. As I understand, it is an early style governor but could be wrong...I have had all the linkages off and apart to clean them so they can have full range of movement and had apparently misplaced that one. How much you wanting for the one you have