D-19 with 433 TI diesel
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=151581
Printed Date: 02 Apr 2026 at 4:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D-19 with 433 TI diesel
Posted By: Tim_Gorge
Subject: D-19 with 433 TI diesel
Date Posted: 26 Jun 2018 at 10:53am
|
Hey guys some of you have been asking for me to get pictures of this project posted, well it still tells me that my pictures are incompatible...... So... below is a link of a walk around on youtube. https://youtu.be/bHVbr15Aocw" rel="nofollow - https://youtu.be/bHVbr15Aocw |
Replies:
Posted By: Peterson
Date Posted: 26 Jun 2018 at 11:34am
|
Get yourself a tractor exhaust manifold to tilt the turbo in some. Then you wouldn't need to cut the side panel that much. ------------- 7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2 |
Posted By: JayIN
Date Posted: 26 Jun 2018 at 12:03pm
|
I saw a 433I in a WD 45 at Rantoul. Looked.factory. Cant find the pic. ------------- sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?" |
Posted By: SteveM C/IL
Date Posted: 26 Jun 2018 at 12:44pm
| The orange engines(earlier) had the flat manifold |
Posted By: 1852 Moore Farm
Date Posted: 26 Jun 2018 at 9:36pm
| Please keep this forum updated with that project. The end product with the hydraulic pump interests me since our D19 gasser has been a finicky teaser. |
Posted By: DiyDave
Date Posted: 27 Jun 2018 at 4:45am
| [TUBE]bHVbr15Aocw[/TUBE] |
Posted By: Tim_Gorge
Date Posted: 27 Jun 2018 at 10:04am
| I will keep you guys updated. I'm an organic crop farmer so I don't have allot of time right now to work on it. So it may be a month or so until I get to that point. We also have a gas D19 that tractor has been a work horse for my family its always been the most dependable tractor we have. I just don't like feeding it haha. |
Posted By: Tim_Gorge
Date Posted: 27 Jun 2018 at 10:07am
| I don't know how you did this DIY Dave but thank you. I need to experiment with this forum more. Did I mention I'm a mechanic not a computer tech lol. |
Posted By: orangeman
Date Posted: 27 Jun 2018 at 3:44pm
|
Creativity and talent combined. Keep up the good work! Please keep the forum posted on further surgeries and your overall satisfaction with the project. Appreciative of all the good efforts to post/share this information. Orangeman
|
Posted By: DiyDave
Date Posted: 27 Jun 2018 at 5:55pm
Tim, I'm no computer whiz, Coke told me how...  Go to the long form reply box, when you look at it, you will see a little bluish filmstrip icon, 8th from left. click on, paste in your copied youtube link, into the box. (I always take out the s in https// part, this forum useter have a problem with it.) Now click on preview. If its right, it should appear, in the box. Then hit OK, and the box will disappear, and the video will appear, with the word Tube, on either side of it. Post, and your done...
 |
Tim_Gorge wrote: