Rumely 6 oil pan
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=151343
Printed Date: 04 Sep 2025 at 9:37am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Rumely 6 oil pan
Posted By: rumely6a
Subject: Rumely 6 oil pan
Date Posted: 17 Jun 2018 at 4:41am
|
after 30 years of collecting parts i am now putting together one or two Rumely 6 tractors looking for the oil pan under the subframe. If you have one great. if you have one you don't want to sell I would like to get a pattern as I would have some made. thanks in advance
|
Replies:
Posted By: Bill_MN
Date Posted: 17 Jun 2018 at 7:15am
|
Hi there, I am also working on a Rumely 6 (not mine) but I was just curious what carburetors you have for yours? I have an original Zenith 156 that is in bad shape and I'm looking to replace it with another model like a K5 that is easier to find parts for. What did you find? Thanks ------------- 1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow |
Posted By: rumely6a
Date Posted: 17 Jun 2018 at 10:44am
|
I'll have a look and send photos. I believe one is a 156 but not certain. is your engine together?
|
Posted By: Michael V (NM)
Date Posted: 17 Jun 2018 at 7:00pm
|
I have a pair of fenders for a rumley6... My granddad got them somewhere..some auction probably...I haven't really looked at them in quite some time, know they are for a rumley 6 cause I can kinda make out the decal on the fender,, or I could a few years ago,,here in dry NM they should be in decent shape.. |
Posted By: rumely6a
Date Posted: 17 Jun 2018 at 7:36pm
|
can you send or post photos? I am negotiating to have sheetmetal made including fenders
|
Posted By: rumely6a
Date Posted: 17 Jun 2018 at 7:38pm
|
Bill in MN both the carbs are Zenith but i don't have model numbers. I will be using both so not sure i can help at this time otherwise. i can get the model numbers in a few weeks if that is helpful. i had these rebuilt in the 1990's when I started collecting parts.
|
Posted By: Michael V (NM)
Date Posted: 17 Jun 2018 at 9:15pm
Yes, be a day or three before I can get some...can also text pics.. |
rumely6a wrote:Posted By: rumely6a
Date Posted: 18 Jun 2018 at 9:09am
|
Bill You might try Jim Treadwell at Treadwell Carb in NY 607- 963-6628 good guy
|