Anyone attend this sale?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=151319
Printed Date: 02 Sep 2025 at 9:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Anyone attend this sale?
Posted By: Daehler
Subject: Anyone attend this sale?
Date Posted: 16 Jun 2018 at 8:23am
|
https://masoncity.craigslist.org/grd/d/auction-allis-chalmers/6590294987.html" rel="nofollow - https://masoncity.craigslist.org/grd/d/auction-allis-chalmers/6590294987.html I was looking through Craigslist and sale it. Had a 8050 with Agridata ------------- 8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more! "IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!" |
Replies:
Posted By: acben20
Date Posted: 16 Jun 2018 at 12:20pm
| Yes I did the 8050 was very nice sold for $25,000 |
Posted By: victoryallis
Date Posted: 16 Jun 2018 at 9:13pm
|
What did the hopper bottom bring? ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
Posted By: sserven
Date Posted: 17 Jun 2018 at 5:58pm
| What was the rare electronic dash in the 8050 all about? I've never heard of that option? |
Posted By: Daehler
Date Posted: 17 Jun 2018 at 8:07pm
|
It was suppose to be installed on 50 tractors but only 30 were produced. Had about 10 or so functions that it could showed on a single line display, plus 18 warning lights but would have to look at my op manual for it. Things such fuel level, water temp and oil pressure would show briefly the move to the next. Also had light selection instead of just flood or all on. I think there are more than 30 floating around but its hard to tell. Sensors were somewhat unreliable from what ive heard. It also would tell hour many hours is on a service, and count area covered. They were about 10 years ahead of their time with them. ------------- 8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more! "IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!" |
Posted By: victoryallis
Date Posted: 17 Jun 2018 at 9:56pm
Deere had it starting in’89 ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
Daehler wrote: