6080 safety switches
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=151180
Printed Date: 29 Dec 2025 at 8:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 6080 safety switches
Posted By: Dkranawetter
Subject: 6080 safety switches
Date Posted: 10 Jun 2018 at 8:25pm
|
We have a Allis 6080 which has the safety switch which has to be pulled to start it we thought these have been going out for a while and they finally have we thought but we jumped around then and still won’t work dose anyone know what the problem could be
|
Replies:
Posted By: MACK
Date Posted: 10 Jun 2018 at 8:46pm
|
Could be a lot of things. There is a total of four switches. Two on right side, one on left and one under floor mat for clutch. Get a test light and start at switch on white wire and follow through until you run out of current. That will be your problem. MACK
|
Posted By: DSeries4
Date Posted: 10 Jun 2018 at 9:01pm
If any of the switches need replacing, AGCO has them and they really do not cost much! The PTO switches have proven most troublesome for me when it comes to getting them adjusted right.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: DougG
Date Posted: 10 Jun 2018 at 9:09pm
|
They are there for a reason,
|
Posted By: victoryallis
Date Posted: 11 Jun 2018 at 8:15am
We have 2 6080’s with a third one coming. Both of the ones here have/had issues with the PTO safety switches they have been a constant battle. Never had any issues with the clutch one. After getting nearly ran over by the 7000 after a shortcut I won’t bypass the clutch one. Too me the PTO switches are more of a hazard than a safety feature.
-------------
8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760
|
|