Print Page | Close Window

AC 7030

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=151043
Printed Date: 04 Apr 2026 at 6:01am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: AC 7030
Posted By: Stanley
Subject: AC 7030
Date Posted: 05 Jun 2018 at 6:51pm
I'm looking at a 7030 and have a couple questions. Where is the serial number located and were they only made one year? (1974). If they were made for only a short period of time, what was the reason. Also what were some of the problems w/ the tractor. Thank you for all replies.



Replies:
Posted By: Ron(AB)
Date Posted: 05 Jun 2018 at 7:20pm
I think they were made two years...then they changed the horsepower ratings and added more models.

They were a very solid tractor.


Posted By: Michael V (NM)
Date Posted: 05 Jun 2018 at 8:27pm
SN is just above and little to the left of the PTO, should start  with 7030 then a 4 digit number..maybe a letter  on the end..
 
and what Ron said..oh yea, available in power director only


Posted By: jiminnd
Date Posted: 05 Jun 2018 at 9:33pm
Had one when new, was pretty good unit for me, the upgrades were some to the hyd couplers and I think heavier cables for the hyd levers

-------------
1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner)


Posted By: MACK
Date Posted: 05 Jun 2018 at 9:38pm
Good tough old tractors. Main problem is age like me. Could be 45 years old.   MACk


Posted By: Peterson
Date Posted: 05 Jun 2018 at 10:15pm
Bidding on the one that's on Smith sales? We are too. Don't look half bad.

-------------
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2


Posted By: Stanley
Date Posted: 06 Jun 2018 at 9:02am
I'm looking at one from a private party not an auction. He is asking $5000.00, but I think can be bought a little cheaper. Thanks for all the replies.


Posted By: DrAllis
Date Posted: 06 Jun 2018 at 9:09am
They were made from Feb 1973 thru the Fall of 1974....a short two year run.


Posted By: Lonn
Date Posted: 06 Jun 2018 at 1:19pm
Official dealer introduction was January 1973. We run one and a 7050. Great tractors. Some of the visual differences that the 7040/7060 have, were, as mentioned, better hydraulic couplers and remote cables. The 7040/7060 had slightly larger diameter rear axles. Location of cab grab handles were changed. There were minor internal changes too. Pretty much all minor changes. The 7030 was about 131 PTO hp while the 7040 was bumped to about 136. I'm really not too sure why the number was changed to 7040.


-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot


Posted By: Stanley
Date Posted: 08 Jun 2018 at 12:51pm
Got it bought for $2800.00. Tractor appears ok. Cab must have been an add-on (year around). Cab is in rough condition. Seat is shot. Where would anyone recommend I look for a new seat. 


Posted By: Lonn
Date Posted: 08 Jun 2018 at 1:01pm
I put a Grammer Air ride seat in my 7050 and do not regret it, though pricey.


-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot


Posted By: wekracer
Date Posted: 08 Jun 2018 at 7:21pm
Originally posted by Lonn Lonn wrote:

I put a Grammer Air ride seat in my 7050 and do not regret it, though pricey.


I have 3 as well in the 8010,50 &70. The only way to go


Posted By: AllisFreak MN
Date Posted: 08 Jun 2018 at 10:22pm
Originally posted by MACK MACK wrote:

Good tough old tractors. Main problem is age like me. Could be 45 years old.   MACk
Oh to be 45 again.

-------------
'49 A-C WD, '51 A-C WD, '63 A-C D17 Series III, 1968 A-C One-Seventy, '82 A-C 6060, '75 A-C 7040, A-C #3 sickle mower, 2 A-C 701 wagons, '78 Gleaner M2


Posted By: MACK
Date Posted: 09 Jun 2018 at 7:24am
Me toooo.        MACK



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net