Print Page | Close Window

cutting edges for dozer needed

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=150983
Printed Date: 09 Jul 2025 at 11:29am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: cutting edges for dozer needed
Posted By: bakwoodsfarm
Subject: cutting edges for dozer needed
Date Posted: 03 Jun 2018 at 7:11pm
A friend of mine needs cutting edges for his dozer. Fiat-Allis 11b. Most all the places here have closed up and one place told him they were not available any longer.



Replies:
Posted By: DiyDave
Date Posted: 03 Jun 2018 at 8:33pm
Try Stephens equip, near Pittsburgh, PA.

http://www.stephensequipment.com/" rel="nofollow - http://www.stephensequipment.com/


Posted By: Ian Beale
Date Posted: 03 Jun 2018 at 9:01pm
You might find that it is a pretty standard cutting edge with 6 inch hole spacing.

If so any ground engaging tools place should be able to supply.

(If of European Fiat origin (which I doubt that is) check for 150 mm spacing - I was warned that it is NOT 6 inch)


Posted By: bakwoodsfarm
Date Posted: 04 Jun 2018 at 5:26am
Thanks


Posted By: Lazyts
Date Posted: 05 Jun 2018 at 1:47pm
The last ones I got were through the local Case Construction dealership- they were ESCO brand, Allis part numbers for the 11S straight dozer: 
70695517 blade (x3)
70606228 bit (x2)



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net