Farm Equipment - Allis Chalmers 230 gas combine engine in WD45

Print Page | Close Window

Allis Chalmers 230 gas combine engine in WD45

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=150271
Printed Date: 09 Sep 2025 at 3:45am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis Chalmers 230 gas combine engine in WD45

Posted By: Preston230
Subject: Allis Chalmers 230 gas combine engine in WD45
Date Posted: 08 May 2018 at 9:24pm

Ok so i wanna put a 230 gas combine engine in my wd45 gas frame. Will i have to do anything other than a starter, flywheel, and adaptor plate. Will i need to have my crank ground or anything?
Thanks
Preston

Replies:

Posted By: DrAllis
Date Posted: 08 May 2018 at 9:31pm

Gas radiator won't work. What are you using for a governor and throttle linkage??

Posted By: Gary Burnett
Date Posted: 09 May 2018 at 1:16am

I have put a couple in diesel frames that gives you the adapter plate,starter,radiator,hood and flywheel,as far as the governor and making a front mount the front plates and governor off a Cockshutt
30,40 or 50 makes for the easiest conversion.

Posted By: Preston230
Date Posted: 09 May 2018 at 5:16am

Ok Thanks for the information. I will probably have to find a governor for it and use linkage off some thing else or make it.