Chisel plow question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=150107
Printed Date: 13 Dec 2025 at 12:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Chisel plow question
Posted By: mark-east-tn
Subject: Chisel plow question
Date Posted: 03 May 2018 at 9:14pm
|
I have a add in classifieds wanting to buy a chisel plow for my 8010 2wd tractor what size do you all recommend for ground in east tn. , would like to have pull type have a 3pt hitch type now that’s a 5 bottom but I need to go bigger . Thanks for input , chisel plows around me are not very common equipment .
|
Replies:
Posted By: MACK
Date Posted: 03 May 2018 at 10:19pm
|
7 shank if you put it in the ground. Pull a 9 shank with 7050. MACK
|
Posted By: Johnwilson_osf
Date Posted: 04 May 2018 at 6:54am
We pull an 11 shank 3pt chisel (IH model) with our 8010. It pulls it well, depending upon conditions.
-------------
Allis Express: Eastern PA on Rt 80
8050, 8010, 6080, 190, D14, DA 6035, AA 6690, 5650, Gleaner F2
|
Posted By: Lonn
Date Posted: 04 May 2018 at 9:42am
An Allis Min-Til 9 shank is all my 7050 can handle if I put it in as deep as it will go in our ground. In fact without a lot of additional weight it won't pull it all the way in, but the 190XT pulls an old Krause 9 shank as deep as it will go all day long in 5th gear.
-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot
|
Posted By: Gary
Date Posted: 04 May 2018 at 4:21pm
11 tooth For Sale in Ontario
https://www.kijiji.ca/v-farming-equipment/stratford-on/allis-chalmers-chisel-plow/1351217252?enableSearchNavigationFlag=true" rel="nofollow - https://www.kijiji.ca/v-farming-equipment/stratford-on/allis-chalmers-chisel-plow/1351217252?enableSearchNavigationFlag=true
|
Posted By: Josh in Pa
Date Posted: 04 May 2018 at 8:02pm
|
Are you looking for a disc chisel or just a pull type chisel plow? If your looking at disc chisel, I’d say 5 shank, and maybe 7. Drawn chisel plow, 7 shanks would probably work good. They work best going fast.
|
Posted By: Kurt WI
Date Posted: 04 May 2018 at 8:13pm
I have a 7 shank Landoll soil saver for sale. Pulled it with a 7020. Located in WI
-------------
WD D17D 170 190xt 190xtIII 200 7020
|
|