Print Page | Close Window

185 3pt cylinders

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=149793
Printed Date: 31 Oct 2025 at 6:35am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 185 3pt cylinders
Posted By: Eldon (WA)
Subject: 185 3pt cylinders
Date Posted: 23 Apr 2018 at 9:36pm
I have one that started leaking bad, it has the large dia piston/rod. I have one with a small dia rod sitting here, can I mix and match??

-------------
ALLIS EXPRESS!
This year:



Replies:
Posted By: darrel in ND
Date Posted: 24 Apr 2018 at 6:11am
I can't speak as to whether or not mix and matching is a good idea or not, but I can say that with two very in-expensive seals (actually, one seal and a wiper) from Agco, you can have your leaky cylinder fixed in pretty short order. Darrel


Posted By: whatscooking
Date Posted: 24 Apr 2018 at 6:58am
I did mine, super easy, snap ring lets go through the oil line with a small screwdriver


Posted By: tbran
Date Posted: 24 Apr 2018 at 7:52am
good advice - they will interchange , but the large cylinder with 70253347 and wiper 70253346 and 15 minutes  - you have to remove the cyl anyway, will cure the issue for a long time...

-------------
When told "it's not the money,it's the principle", remember, it's always the money..



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net