Farm Equipment - D17 diesel camshaft

Print Page | Close Window

D17 diesel camshaft

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=149722
Printed Date: 29 May 2025 at 2:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 diesel camshaft

Posted By: chuck
Subject: D17 diesel camshaft
Date Posted: 21 Apr 2018 at 6:59pm

Have a early d17 diesel and wondering if the camshaft is the same as a WD 45 diesel looked in the agco parts book and shows they have same part number I got some from both tractors but the numbers on the camshafts do not match?

Replies:

Posted By: MACK
Date Posted: 21 Apr 2018 at 10:11pm

The 262 cam has flat places for rods to clear cam. 230 can be ground to work. MACK

Posted By: chuck
Date Posted: 21 Apr 2018 at 11:40pm

The can that came out of the 45 diesel has the flat spots between lobe's if that's what your talk about, so it must of been updated or changed at one time. So it should work then right. Putting the two side by side I can't tell a difference. Thanks mack

Posted By: MACK
Date Posted: 22 Apr 2018 at 7:48am

Should be ok. MACK

Posted By: chuck
Date Posted: 22 Apr 2018 at 8:10am

Thanks mack, just curious looking in agco books, the d19 diesel also has the same part number as d17/wd45, so they would all use the same camshaft, maybe some gear changes on the latter d19.