New exhaust manifold studs and brass nuts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=149448
Printed Date: 15 May 2024 at 12:00am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: New exhaust manifold studs and brass nuts
Posted By: jerbob
Subject: New exhaust manifold studs and brass nuts
Date Posted: 13 Apr 2018 at 8:06pm
Hi friends.
Can anyone let me know where to source new replacement exhaust manifold studs and brass nuts for my HD16DC? It's a 16000.
Thank you
|
Replies:
Posted By: DMiller
Date Posted: 14 Apr 2018 at 5:24am
|
If Minnpar does not have then will have to go generic. Getting a reasonably accurate length on one and looking thru the McMaster Carr catalog is the other option as many small auto parts stores may no longer carry.
|
Posted By: DMiller
Date Posted: 14 Apr 2018 at 5:26am
As far as anyone still educated on Allis parts there is Kwikparts Williamsburg MO, great and well schooled old Allis dealer staff run it.
http://kwikpartsllc.com/" rel="nofollow - http://kwikpartsllc.com/
|
Posted By: jerbob
Date Posted: 14 Apr 2018 at 7:42am
|
Thank you so much for the info DMiller. Great help.
|
Posted By: rickv57
Date Posted: 14 Apr 2018 at 9:49am
|
I put a new set on a HD 21 a while back, purchase them at local caterpillar dealer as they have a large inventory of nuts bolts and studs Etc
|
Posted By: jerbob
Date Posted: 14 Apr 2018 at 11:53am
Great Rick. I have s dealer a gal hour away.
Thank you.
|
Posted By: Ray54
Date Posted: 15 Apr 2018 at 7:53pm
|
Cat had a hardware catalog they us to call "One Safe Source". Have seen it online when some smart person posts links. Just put it into google and it came up, see if you can find part numbers for what you want. Some of the young help is almost worthless if they have to hunt up stuff. Good luck.
|
Posted By: jerbob
Date Posted: 15 Apr 2018 at 7:58pm
|
Great idea and thank you Ray
|
Posted By: CTuckerNWIL
Date Posted: 18 Apr 2018 at 10:41am
https://parts.cat.com/en/catcorp?gclid=CjwKCAjw2dvWBRBvEiwADllhn5lDy2GVPxgxtZhvOaHZhEIORJzh9gb3TPBJXUFbYUkDoUWltCQJ9BoCuasQAvD_BwE" rel="nofollow - OneSafeSource
This should get you there.
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: jerbob
Date Posted: 18 Apr 2018 at 12:30pm
Posted By: jerbob
Date Posted: 30 Apr 2018 at 8:33am
Update on a small item.
My Agco dealer found original in stock exhaust manifold studs. Found 3 of them with brass nuts and washer. $14.00 per stud and I took both he had. This dealer has found me stuff I thought long gone. Staying on their good side for sure.
|
Posted By: Josh H
Date Posted: 15 May 2018 at 8:35pm
|
Any of you guys ever use or checkout mcmaster carr? they have the hardware!
|
Posted By: jerbob
Date Posted: 15 May 2018 at 9:13pm
I haven't but will check them out.
Thank you
|
Posted By: Corey743
Date Posted: 16 May 2018 at 4:59am
|
You could also check with Grainger or mscdirect.com they are both industrial supply companies
|
Posted By: jerbob
Date Posted: 16 May 2018 at 5:59am
|