Farm Equipment - D-14 engine into a CA ?

Print Page | Close Window

D-14 engine into a CA ?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=149440
Printed Date: 05 Sep 2025 at 3:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D-14 engine into a CA ?

Posted By: WF owner
Subject: D-14 engine into a CA ?
Date Posted: 13 Apr 2018 at 3:18pm

What is involved in putting a D-14 engine into a CA?

Replies:

Posted By: Hyperpack
Date Posted: 13 Apr 2018 at 7:23pm

I think this has been covered on the pulling Forum.

Seems like it needs some custom studs on front of engine, but is a good fit.

Hyperpack

Posted By: Lon(MN)
Date Posted: 13 Apr 2018 at 9:21pm

I had to modify the upper radiator hose. I used a 138 manifold so the muffler would come through the hood so I did not have to modify the hood. Had to build a bracket for the air cleaner so that would come through the hood without hood modifying. Never got the temp gauge worked out. Rest was direct bolt in.

Posted By: housemover
Date Posted: 14 Apr 2018 at 4:15pm

got any pictures, sounds like fun!

Posted By: jaybmiller
Date Posted: 14 Apr 2018 at 4:52pm

I'd rather trade one of my D-14s for your CA , than to have a 'hybrid'.
Mind you NONE of us going anywhere thanks to 'he who shall remain nameless, and his machine' !

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water