Wheel bolt patterns
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=149393
Printed Date: 01 Jun 2025 at 2:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Wheel bolt patterns
Posted By: mjbower
Subject: Wheel bolt patterns
Date Posted: 12 Apr 2018 at 7:55am
| Does a uc and a wc have the same rear wheel bolt pattern. Thanks |
Replies:
Posted By: CAL(KS)
Date Posted: 12 Apr 2018 at 8:15am
|
NO! I made my own centers to fit pressed steel wheels on my UC. Do a search in the pulling forum, I put up a bunch of pictures.
I would have to go back through my "notes" to check the spacing, I don't remember off hand.
found my post. but I didn't post the pattern dimensions http://www.allischalmers.com/forum/adapting-wheels-for-your-puller_topic124352_post1018997.html?KW=#1018997" rel="nofollow - http://www.allischalmers.com/forum/adapting-wheels-for-your-puller_topic124352_post1018997.html?KW=#1018997 ha! I see you posted on it lol
------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: mjbower
Date Posted: 15 Apr 2018 at 12:19pm
| Ok thanks just looking ahead for a possible project. |
Posted By: Unit3
Date Posted: 15 Apr 2018 at 12:45pm
|
Up at Hutchinson years ago, there was a later UC with cast centers like a styled WC. Never have seen another. ------------- 2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C |
Posted By: DrAllis
Date Posted: 15 Apr 2018 at 1:34pm
| I think the UC and a Farmall F-30 were the same pattern. |
Posted By: MACK
Date Posted: 15 Apr 2018 at 8:34pm
| I think WC was like F20. MACK |
Posted By: mjbower
Date Posted: 17 Apr 2018 at 8:29am
| Yes that's the reason I questioned it the cast centers appear similar in pictures. Thanks guys |
Posted By: CAL(KS)
Date Posted: 17 Apr 2018 at 8:44am
|
the Thompson high crops used a cast center. they had a couple different styles. Its likely true the uc is same as F30, as the wc is same as F20, but I didn't think those IH's ever had cast centers ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: CTuckerNWIL
Date Posted: 17 Apr 2018 at 9:06am
Early round spoke wheels on Farmalls came from F&H just like the WC rear wheels.  ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
CAL(KS) wrote:Posted By: CAL(KS)
Date Posted: 17 Apr 2018 at 9:19am
yes, that is correct. I was saying likely the UC and F30 may be the same.
------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |