Farm Equipment - Question on a D14 head

Print Page | Close Window

Question on a D14 head

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=149312
Printed Date: 22 Sep 2025 at 9:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Question on a D14 head

Posted By: Madkor
Subject: Question on a D14 head
Date Posted: 09 Apr 2018 at 8:29am

I am replacing the manifold studs. when I pulled the studs antifreeze came out of two of the short stud holes. I assume that's not normal and my head is cracked or somebody put the studs in to deep. If that is normal do you put a sealer on the studs? So just wondering what I should do next. Thanks in advance for your advise.

Replies:

Posted By: DrAllis
Date Posted: 09 Apr 2018 at 8:58am

Put goop on the studs and install them. Perfectly normal.

Posted By: Madkor
Date Posted: 09 Apr 2018 at 9:01am

Thanks

Posted By: DiyDave
Date Posted: 09 Apr 2018 at 6:17pm

X2 on perfectly normal. Put some loctite on the studs. It'll seal long enough, fer the rust to take over...

I think the generator bracket bolts do this, too...