Print Page | Close Window

Help with D-series lights?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=149274
Printed Date: 06 Apr 2026 at 12:58am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Help with D-series lights?
Posted By: JWV Fulton
Subject: Help with D-series lights?
Date Posted: 08 Apr 2018 at 7:24am
Does any one make or sell the bolts to mount the D-series fender headlights? I need 2 bolts to replace some rusty stripped out old ones. Thanks!



Replies:
Posted By: Scott B
Date Posted: 08 Apr 2018 at 7:03pm
I'm with you on needing these. So chiming in to follow the post

-------------
D17 Series 1
Allis B- 1939
Allis B- 1945


Posted By: DSeries4
Date Posted: 08 Apr 2018 at 8:16pm
I'll post a picture in a few days.  I've managed to salvage a few.  I think the bolt itself can still be found without the hole through it, so that is a good start.  Check with local industrial suppliers.  If they carry them, you would just have to drill a hole through them.


-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080


Posted By: Brian Jasper co. Ia
Date Posted: 09 Apr 2018 at 8:51am
I needed a couple headlight bolts once. I got the lowest grade bolt at the hardware store and drilled right down the center with a drill press.

-------------
"Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford


Posted By: Acdiesel
Date Posted: 09 Apr 2018 at 10:47am
A 1/2" plow bolt with a hole drilled down the center. 
or a carriage bolt will work great too.
I've used both.

dan 


-------------
D19 Diesel,D17 Diesel SER.3
2-D14, 2-D15 SER.II WF/NF
D15 SER.2 DIESEL
D12 SER.I, D10 Ser.II
2-720'S D21 Ser. II

Gmc,caterpillar
I'm a pharmacist (farm assist) with a PHD (post hole digger)



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net