Print Page | Close Window

Salvage for Sale

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=148783
Printed Date: 01 Apr 2026 at 1:20pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Salvage for Sale
Posted By: outbackfarm
Subject: Salvage for Sale
Date Posted: 24 Mar 2018 at 2:51pm
I have a 4wd 6140 with an engine problem I cannot fix. Looking to sell for salvage.  

Please contact me if interested jeff@outbackfarm.net


Replies:
Posted By: Daehler
Date Posted: 24 Mar 2018 at 3:41pm
If you were closer id be highly intrested. That looks too good to salvage, and a matching loader with fwa. Hope someone could get it going

-------------
8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more!
"IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!"

Posted By: WF owner
Date Posted: 24 Mar 2018 at 4:34pm
Does that use the 3 cylinder Perkins like the 160?
 
Edit:
Just looked it up and it uses a Toyosha  diesel

Posted By: steve(ill)
Date Posted: 24 Mar 2018 at 4:39pm
 

Production:

Manufacturer:Allis Chalmers
Original price (USD):$15,891
 

http://www.tractordata.com/farm-tractors/000/2/0/201-allis-chalmers-6140-engine.html" rel="nofollow -    Toyosha 2.3L 3-cyl diesel

http://www.tractordata.com/farm-tractors/000/2/0/201-allis-chalmers-6140-engine.html" rel="nofollow -  

Capacity:

Fuel:13.2 gal [50.0 L]
 

http://www.tractordata.com/articles/technical/threepoint.html" rel="nofollow - Rear Type:

I
Control:top-link draft sensing
Rear lift:3190 lbs [1446 kg]
 

http://www.tractordata.com/articles/technical/pto.html" rel="nofollow - Rear PTO:

independent
Rear RPM:540
 

http://www.tractordata.com/farm-tractors/000/2/0/201-allis-chalmers-6140-dimensions.html" rel="nofollow - Wheelbase:

76.2 inches [193 cm]
Weight:4000 to 4400 pounds
Front tire:6.00-16
Rear tire:13.6-28
http://www.tractordata.com/farm-tractors/000/2/0/201-allis-chalmers-6140-dimensions.html" rel="nofollow -  

6140 Serial Numbers:

Location:Serial number on the left side of the fuel tank.
1982: 1001
1983: 1726
1984: 1851
1985: 2711

http://www.tractordata.com/articles/technical/serialnumbers.html" rel="nofollow -
 

Allis Chalmers 6140 Power:

PTO (claimed):40 hp [29.8 kW]
 

Mechanical:

Chassis:4x2 2WD
 4x4 MFWD 4WD
Final drives:inboard planetary
Differential lock:mechanical rear
Steering:power
Brakes:mechanical wet disc
Cab:Open operator station. ROPS and canopy available.
 

Hydraulics:

Type:open center
Pump flow:10 gpm [37.9 lpm]
 

Electrical:

Ground:negative
 

Battery:

Number:1
Volts:12
 

Page information:

Last update:February 26, 2018
Copyright:Copyright 2018 TractorData LLC
Contact: http://www.tractordata.com/articles/contact/about.html" rel="nofollow -

Posted By: copyrite1972
Date Posted: 25 Mar 2018 at 10:58am
DON'T SCRAP IT!!!!!! Cry  If I was closer, I'd snap it up in a second!!!

-------------
D15 Series II

Posted By: outbackfarm
Date Posted: 25 Mar 2018 at 3:12pm
I don't want to scrap it.  I used it regularly until last weekend when the engine noise started.  I just can't find the engine parts to fix it.  

Posted By: B26240
Date Posted: 25 Mar 2018 at 4:12pm
I would think with the internet connected to the whole planet there must be parts out there somewhere to fix your engine, or someone knows how to swap in a Kubota or other engine. Don't give up so soon as that is a great size tractor.

Posted By: lowell66dart
Date Posted: 26 Mar 2018 at 10:19am
What parts do you need? Rings, bearings, gaskets and seals are easy.

-------------
AC 6080 (8030,7060,200,175,D-17HC, 6040,160,6140 all gone) Farmall 1066 & 656 Hi-Clear (for sale), White 2-62 High Clearance, JD 4255 Hi Clear.

Posted By: HudCo
Date Posted: 26 Mar 2018 at 3:39pm
how about a perkins ad 3 or ad4 swap to bad eveything is across the country from me

Posted By: outbackfarm
Date Posted: 26 Mar 2018 at 8:02pm
would that fit a 6140?

Posted By: outbackfarm
Date Posted: 26 Mar 2018 at 8:06pm
I'm not exactly sure what parts I will need.  It was running fine until last weekend.  Then it stalled and now has a squeal in the engine then I crank it. It seems cam related .  Engine seems to bind when one valve is in the down position.  When I removed the rocker arm assembly it seemed to free up.  So that's why I'm thinking cam bearing but I could be wrong.

Posted By: WF owner
Date Posted: 27 Mar 2018 at 6:12am
The camshaft would still turn with the rocker arms removed, so I doubt it's cam bearings.
 
 

Posted By: lowell66dart
Date Posted: 27 Mar 2018 at 7:09am
Do you have a way to manually cycle the valves to see if one may be bent for some reason?

-------------
AC 6080 (8030,7060,200,175,D-17HC, 6040,160,6140 all gone) Farmall 1066 & 656 Hi-Clear (for sale), White 2-62 High Clearance, JD 4255 Hi Clear.

Posted By: Timberjack@48
Date Posted: 03 Jun 2019 at 4:41am
Did you end up selling it?

Posted By: Drok664
Date Posted: 13 Nov 2019 at 9:35pm
What end up happening to your tractor

Posted By: Jim.ME
Date Posted: 14 Nov 2019 at 4:45pm
Hope he answers you, but he hasn't signed in since April 2018.


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net