Print Page | Close Window

Track truck roller reseal HD6E

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=148619
Printed Date: 20 Aug 2025 at 9:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Track truck roller reseal HD6E
Posted By: mahto48
Subject: Track truck roller reseal HD6E
Date Posted: 19 Mar 2018 at 5:19pm
Is there anyone that know a source for the ring seal spring assembly for resealing the trucks. Part # 047581 package # 083536



Replies:
Posted By: gemdozer
Date Posted: 19 Mar 2018 at 6:51pm
I should have some seals assembly for HD6 bottom roller am checking tomorrow and comback you


Posted By: Ullrich Farms
Date Posted: 19 Mar 2018 at 8:02pm
Did you find replacement track roller seals for your HD6?
I'm rebuilding my Dad's HD5 and in need of track roller seals. The rubber boots at cracked and separating.


Posted By: mahto48
Date Posted: 20 Mar 2018 at 10:39am
Thanks for looking. I'm thinking there are two types (standard and heavy duty) Any thoughts on that?


Posted By: mahto48
Date Posted: 20 Mar 2018 at 10:42am
I'm still looking.Confused I will keep you in mind.


Posted By: gemdozer
Date Posted: 20 Mar 2018 at 1:12pm
I check today and have some bottom roller seals
1 spring ass.048666
1 boots 048665
2 rings seal 047151
1 gasket seal 047605
 these parts are hold stock new


Posted By: Lazyts
Date Posted: 20 Mar 2018 at 1:31pm
Minnpar shows stock of 70047581 spring assembly...  I'll put in a little plug for them as they have really helped me keep my old Allis going.


Posted By: gemdozer
Date Posted: 20 Mar 2018 at 1:44pm
The 047581 is seal for HD5 top roller and have 2 new one


Posted By: mahto48
Date Posted: 23 Mar 2018 at 10:12am
Turns out I have the heavy duty rollers. The one spring ass. #048666 and the one boot ass. #048665 will fit. Do you want to part with them. Please send me a private message.


Posted By: mahto48
Date Posted: 23 Mar 2018 at 10:39am
I just talked to Minn Par and was told they have a lot of boots #048665 for my heavy duty rollers on my HD6e. I would think the same should be true for your needs.


Posted By: gemdozer
Date Posted: 23 Mar 2018 at 5:29pm
I am still have 048666 spring assembly and have some 048665  boots for HD6



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net