Print Page | Close Window

Determine Allis Chalmers tractor?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14841
Printed Date: 10 Jun 2024 at 1:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Determine Allis Chalmers tractor?
Posted By: young582
Subject: Determine Allis Chalmers tractor?
Date Posted: 06 Jul 2010 at 10:44pm
earlier today i posted about finding the serial number on my allis chalmer tractor. after finding it under grease and grut and grass i still cannot get the numbers to match up on the websites serial number chart. stamped is TRACTOR # with 062364 below it. i would like to know what year and model it is. i only paid 400$ for it from my buddies gram-pa and its a hell of a steal. besides it missing the rear hitch and front plow blade thats the only think that im worried about money wise. anyone know how much all that goes for? any help would be great! thanks.



Replies:
Posted By: GreenOrange
Date Posted: 06 Jul 2010 at 10:49pm
I'm gonna guess the 0 is actually a C, and you have a 1948 Model C.  The chart on this page shows the ending serial number for each model year.  Congratulations on your purchase and Welcome!
-John


Posted By: LouSWPA
Date Posted: 06 Jul 2010 at 10:52pm
Depending on the model, the serial no can be located in various places, not to be confused with the engine serial no.(which is what I think you may have)
can you post a pic?


Posted By: young582
Date Posted: 06 Jul 2010 at 10:53pm
i still dont understand how your reading this chart. can you try and explain it to me?


Posted By: young582
Date Posted: 06 Jul 2010 at 10:55pm
Originally posted by LouSWPA LouSWPA wrote:

Depending on the model, the serial no can be located in various places, not to be confused with the engine serial no.(which is what I think you may have)
can you post a pic?

i can post a picture but not at the moment. its still at their house i still need some more money to give them and then im trailering it to my house because it has a blown head gasket but it still starts fine! ill try and get a picture tomorrow after work



Posted By: CTuckerNWIL
Date Posted: 07 Jul 2010 at 7:54am
The numbers listed on this chart are the last serial number produced in that year.
Model 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949
U 19-30 16721 17136 17469 17801 17819 18324 20773 21021 22127 23028
WC 103516 114533 123170 127641 134623 148090 152844 170173 178202 -
RC 5416 5504 - - - - - - - -
A 26895 26914 26925 - - - - - - -
B 49720 56781 61400 65501 70209 72264 73369 80555 92294 102392
C 111 12388 18781 23907 30694 36377 39617 51514 68280 80517
WD - - - - - - - - 9249 35444
G - - - - - - - - 10960 23179
Allis did not use a 0 in front of other numbers so your tractor is more than likely a
C62364 which is a 1948 C.


-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF


Posted By: young582
Date Posted: 07 Jul 2010 at 4:30pm
i understand now. thank you!


Posted By: Bill Long
Date Posted: 07 Jul 2010 at 7:09pm
First Welcome to the Unofficial Allis Chalmers Web site.  If you need any other assistance let us know.  You will find loads of help here.  We all do what we can to keep the Allis Chalmers name alive.
As stated above sounds like you have a C.  However, if you can post pictures we can be of more assistance.
Good Luck!
Bill Long


Posted By: LouSWPA
Date Posted: 07 Jul 2010 at 8:13pm
OK, John (C-IL) has a post above "Tractors for Sale, I've done it again" does your tractor look like any of his?


Posted By: young582
Date Posted: 07 Jul 2010 at 8:17pm
okay, today after work i went by and looked. the 0 is a C and i beleive you guys are correct it is a 1948 model C.


Posted By: LouSWPA
Date Posted: 07 Jul 2010 at 8:22pm
Does it look like John(C-IL) C above? Does it have a drag link for the steering going down the out side of the tractor from steering box to pitman arm?


Posted By: young582
Date Posted: 07 Jul 2010 at 8:31pm
it does not have the steering that goes on the outside.


Posted By: LouSWPA
Date Posted: 07 Jul 2010 at 9:05pm
Then, it's not a C. really going to need a pic



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net