Dad and I went shopping
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=147932
Printed Date: 01 Apr 2026 at 9:10pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Dad and I went shopping
Posted By: Bradleytrench
Subject: Dad and I went shopping
Date Posted: 25 Feb 2018 at 8:34pm
Today I got my father out and about. Picked up this 45 diesel, a2 combine and 3 bottom plow. Who's a good wd45 diesel mechanic to talk to about the 230 engine?? 
|
Replies:
Posted By: Dakota Dave
Date Posted: 25 Feb 2018 at 8:54pm
| Looks like Your diesel has a carb on the right side and a distrubitor on the left |
Posted By: Bradleytrench
Date Posted: 25 Feb 2018 at 8:55pm
| It does for now. But it will soon be injectors and fuel pump |
Posted By: CTuckerNWIL
Date Posted: 25 Feb 2018 at 9:04pm
|
Don Bradley , Don(MO), would be the one to talk to IMO. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: sparky
Date Posted: 25 Feb 2018 at 9:15pm
|
With that wide front or frame rails or both,I don't know if the diesel will fit?? ------------- It's the color tractor my grandpa had! |
Posted By: MACK
Date Posted: 25 Feb 2018 at 10:03pm
| It will fit. Look at left frame shows bent frame to clear injection pump. Been a diesel at one time. MACK |
Posted By: Gary
Date Posted: 26 Feb 2018 at 6:21am
|
and the Diesel Gauges on the Fuel Tank. |
Posted By: JayIN
Date Posted: 26 Feb 2018 at 7:39am
|
Whats in there now? 6cyl chevy? Phone too small. ------------- sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?" |
Posted By: JayIN
Date Posted: 26 Feb 2018 at 7:42am
|
Put a 433I in there and be done with it. Will cost less. (aint the innernet great? Total strangers can tell you what to do with YOUR money) ------------- sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?" |
Posted By: Bradleytrench
Date Posted: 26 Feb 2018 at 12:18pm
| Thanks for the input. Don Mo and I have talk about my situation. He told me it'll take a lot of money to do what I want to do. He has a block. He said the block he has is worth $1000. Just a little sticker shock. But forward we shall go. |
Posted By: Don(MO)
Date Posted: 26 Feb 2018 at 1:21pm
|
OK guys let's just say this WD45 Diesel is in good hands. lol It will be running again with all the right parts. All I can say is" O-boy one more WD45 Diesel in the shop when it's turn come's. ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: Michael V (NM)
Date Posted: 26 Feb 2018 at 3:48pm
| I have a bad block here, bad cracks on top,, not sure about below. ,,but it has all the 'innards' still in it,(crank,rods,pistons,cam etc.,),, I do not know what kind shape their in tho,, oh yea, also have a head,, condition unknown far as cracks and such..core PSb pump and injector lines,, I think the injectors are still in the head..also a few other misc pieces such as fuel filter bases and such,,, make me an offer..it can be yours!! might trade for the gas engine if its a 262..but I need the rear plate and flywheel then too.. |
Posted By: DSeries4
Date Posted: 26 Feb 2018 at 4:16pm
Not a Chevy. Definitely Allis. I think 262. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
JayIN wrote:Posted By: Michael V (NM)
Date Posted: 26 Feb 2018 at 5:20pm
I was guessing a 230 gas from an 'A' combine,, but could be a 262 just as easy... oh yea,, just remembered, I have an exhaust and intake manifold too
|
Posted By: David Maddux
Date Posted: 26 Feb 2018 at 8:36pm
| Shame on you boys! |
Posted By: Bradleytrench
Date Posted: 26 Feb 2018 at 8:49pm
Shame on us?? It's all dads fault. |
Posted By: Steve in NJ
Date Posted: 26 Feb 2018 at 9:27pm
|
Wow! When I first started to read the post, and then looked at the pics, I said wait a minute, that can't be the diesel he's talkin' about, that's got a Carburetor hanging off it. Must be the wrong picture! LOL!! ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: Don(MO)
Date Posted: 27 Feb 2018 at 7:02am
|
Not to worry guys when he takes the old 45 home it will be a true WD45 Diesel with all the right stuff in her.
------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: Don(MO)
Date Posted: 27 Feb 2018 at 7:07am
------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: Don(MO)
Date Posted: 01 Mar 2018 at 6:07pm
|
Up-date, got a call from a good friend on Wednesday he is hauling a complete BD-230 out of a wd45 diesel over for my son's new toy. ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: Bradleytrench
Date Posted: 01 Mar 2018 at 7:23pm
|
I want to thank everyone who has contacted dad to help in finding the parts for this resorection. I'm hoping to be freed up tomorrow to make it to the swap meet to thank everyone personally. But I have 65000 lb excavator to move, a 45000lb excavator and 4 shipping containers to get done before 5 pm. If I can't make it I'll will be up there Saturday. Thanks again. |