Rc rear wheels?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14762
Printed Date: 11 Jun 2024 at 3:54am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Rc rear wheels?
Posted By: Raven
Subject: Rc rear wheels?
Date Posted: 05 Jul 2010 at 2:39pm
| What is the differences between RC centers and Wc centers?? Thanks for the help!!! |
Replies:
Posted By: MNLonnie
Date Posted: 05 Jul 2010 at 3:29pm
|
I've been told the WC centers have 2 half moon notches in them and the RC only has 1. ------------- Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker |
Posted By: TomMN
Date Posted: 05 Jul 2010 at 3:46pm
|
As stated the RC has just one mouse hole. RC:  WC:  The bolts that hold it on are also unique to the RC. Tom |
Posted By: Gary(WI)
Date Posted: 05 Jul 2010 at 5:02pm
| Antbody need aset of those wheel bolts I have them for sale Gary Roidt 920 253 8192 |
Posted By: WC7610
Date Posted: 05 Jul 2010 at 10:05pm
|
Gary, I was just going to say that the bolts are special to the RC! I have some of Gary's RC bolts and can testify they are well done.------------- Thanks Most Bad Government has grown out of Too Much Government- Thomas Jefferson |
Posted By: TomMN
Date Posted: 05 Jul 2010 at 10:18pm
| I got the bolts in the top picture from Gary too, very nice. Tom |
Posted By: alan-nj
Date Posted: 06 Jul 2010 at 6:25am
| i subscribe to the theory that while the one hole cut-out may have been made for the rc, at certain times they used whatever they had on hand. both of my rc's have the 2 hole cut-outs like the wc. alan |
Posted By: B26240
Date Posted: 06 Jul 2010 at 7:33am
| As usual Tom takes excellent pic that make it very clear |
Posted By: NNYACAL
Date Posted: 06 Jul 2010 at 9:17am
|
My R.C. has flat spokes on 28" rims and if it is not original someone sure did a great job of converting from steel to rubber. Any thoughts on this would be helpful!!!! ------------- G,IB,B,C,CA,RC,WC,WF,WD,WD45,D14,D17SERIES 1,2,4 |
Posted By: Kip-Utah
Date Posted: 06 Jul 2010 at 4:56pm
|
I would think that your wheels are definitely cut-down steel wheels. If they were the F&H round spoke 28 inchers, I'd guess that you had a set of Farmal F20 wheels. Even on WCs I'm sure every set of flat spokers I've ever encountered began life as steelies! Kip ------------- HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!! |
Posted By: GreenOrange
Date Posted: 06 Jul 2010 at 6:50pm
|
Most times if a rim went bad, it was easier to switch the entire wheel than just the rim. Same would go for tires - WC wheels are plentiful, RC rims & wheels are not - certainly many RC's had WC rims & centers put on them over the years. -John |
Posted By: Gary(WI)
Date Posted: 07 Jul 2010 at 4:30pm
| If anybody is interested in some wheel bolts I can have some more made $22 each plus shipping Gary Roidt 920 253 8192 |