Allis cultivator question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=146959
Printed Date: 06 Jun 2025 at 1:36am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis cultivator question
Posted By: victoryallis
Subject: Allis cultivator question
Date Posted: 29 Jan 2018 at 9:27am
|
Did Allis make a snap coupler s tine row crop cultivator? 6r30 ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
Replies:
Posted By: JimIA
Date Posted: 29 Jan 2018 at 9:29am
|
I have seen a few spring tine cultivators with snap coupler. A lot of them were three point cultivators with the snap coupler conversion bracket. Or are you talking about Danish tine cultivators? I think those are all three point and have seen very few of those. Jim ------------- An open eye is much more observant than an open mouth |
Posted By: victoryallis
Date Posted: 29 Jan 2018 at 9:34am
|
No something to cultivate soys with. ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
Posted By: shameless dude
Date Posted: 29 Jan 2018 at 12:53pm
| I've got a 6-30 3-pt shank type with rolling shields. did my beans with it. |
Posted By: orangereborn
Date Posted: 29 Jan 2018 at 2:55pm
| I think the 500 and 90 series were up to 8 row and could be had in SC and 3PT. But no S tines. The 90 series were of the vibra-shank "C" shank style.,.They did have a "S" (danish) shank on a folding tool bar (8000 series??) but not in SC. I looked at one of those in a 12 row narrow....Dale |
Posted By: victoryallis
Date Posted: 29 Jan 2018 at 7:23pm
I have a nice 3 pt s tine Alloway but figured if a snap coupler s tine was a option it would free up the 6080. ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
shameless dude wrote:Posted By: Calvin Schmidt
Date Posted: 30 Jan 2018 at 4:38am
|
I had an Allis model 201 6 x 30" row cultivator with rolling tines. I added some S tines ahead of the rollers because I was trying to get a little hill on the kidney bean rows. Checking the forum from Adelaide Australia. ------------- Nothing is impossible if it is properly financed |
Posted By: Brian F(IL)
Date Posted: 30 Jan 2018 at 3:58pm
|
"S" tines didn't come out until after the Snap-Coupler system had gone by the wayside. So no, there would not have been any from a new production standpoint. And while the cultivators were assembled in such a fashion to accommodate various row widths, 30" rows didn't become popular until the mid to late 70's around here (however I believe there was some experimentation around the country with 20" rows). Again, after the snap-coupler tools were no longer being produced. All that said, there may be some old snap-coupler row-type cultivators that have been modified by adding S-tine shanks to them in some fashion (as Calvin suggests). Good luck!
|
Posted By: SLB
Date Posted: 05 Feb 2018 at 8:02pm
| Hello just picked up a 4 row snap coupler cultivator with springs looking to find a service manual. Any Ideas? |
Posted By: shameless dude
Date Posted: 06 Feb 2018 at 1:32pm
| Calvin....you gonna meet up with our buddy that lives over there? oh...and as you should know, we wants pics of your travels over there! hope you are having fun! |