wd45 hand clutch seal
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14670
Printed Date: 14 May 2024 at 11:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: wd45 hand clutch seal
Posted By: tom
Subject: wd45 hand clutch seal
Date Posted: 03 Jul 2010 at 4:54pm
| What do i have to do to remove the seal on the shaft going into the trans houding that controls the hand clutch. my 45 is leaving a tell tale path of oil every where so i can find my way home!! i just hope the bushes are not wore out. |
Replies:
Posted By: Jeff Z. NY
Date Posted: 03 Jul 2010 at 10:14pm
|
I've been lucky and never had one leak yet.
It looks like if you get the bolt out{#7} you can get the shaft out {#9} and replace the seal {#8}. The seal should be available from an AGCO dealer. Part # 70224644 Here is a picture that may help you. 
|