Green 20-35 for Parts> Sombody Save This!!
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=146520
Printed Date: 05 Oct 2025 at 6:01am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Green 20-35 for Parts> Sombody Save This!!
Posted By: steelwheelAcjim
Subject: Green 20-35 for Parts> Sombody Save This!!
Date Posted: 16 Jan 2018 at 7:33pm
|
https://www.auctiontime.com/listings/farm-equipment/auctions/online/23477427/allis-chalmers-20-35" rel="nofollow - https://www.auctiontime.com/listings/farm-equipment/auctions/online/23477427/allis-chalmers-20-35 Hope this does not see the scrap yard! Bidding underway!!!! ------------- Pre-WW2 A-C tractors on steel wheels...because I'm too cheap to buy tires! |
Replies:
Posted By: Alberta Phil
Date Posted: 16 Jan 2018 at 7:42pm
|
Looks far to good to scrap!! Appears to be a '29 and has the correct mag.. Serial number given is actually engine number. Serial number is in front of shift lever. Block could be repaired or replaced. |
Posted By: Michael V (NM)
Date Posted: 16 Jan 2018 at 9:32pm
|
ok.. I put it on my watch list, I hope the other head is there somewhere, they don't have any pictures of the other side, so don't know anything about the carburetor,, or say anything about the engine,,,maybe I'll call tomorrow.. ... I have wanted a E model,, but would prefer a later model with rubber
|
Posted By: john(MI)
Date Posted: 17 Jan 2018 at 11:02am
|
It appears the hood is laying on the ground beside it. The head and some other parts are in the cockpit area. It looks like everything might be there.
------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: Fred in Pa
Date Posted: 17 Jan 2018 at 11:15am
|
There is a extra Governor in front of seat ,.If head is not there these short fender heads are not hard to come by. There is a 20-35 short fender in classified adds that is complete and running
------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: Steve in NJ
Date Posted: 17 Jan 2018 at 4:49pm
|
Boy, that thing is super clean! Nice fenders n' tank to!! Somebody better snag it! ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: CAL(KS)
Date Posted: 18 Jan 2018 at 7:47am
|
only 4.5 hours or so from me. Hmm..... ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: 180Puller
Date Posted: 18 Jan 2018 at 8:50pm
| I dont think that this one will go for scrap....You will probably be surprised at what it sells for.. |
Posted By: steelwheelAcjim
Date Posted: 29 Jan 2018 at 6:31pm
|
Bidding is now open. Hope someone on this forum can add to their collection. Good Luck!!! ------------- Pre-WW2 A-C tractors on steel wheels...because I'm too cheap to buy tires! |
Posted By: JohnCO
Date Posted: 29 Jan 2018 at 7:33pm
|
Only a couple hundred miles from me. Michael, maybe we should talk before the end of the auction. I suspect the serious bidders will wait til near the end of the auction. ------------- "If at first you don't succeed, get a bigger hammer" Allis Express participant |
Posted By: steelwheelAcjim
Date Posted: 31 Jan 2018 at 11:47am
|
SOLD!! $1050.00 USD. ------------- Pre-WW2 A-C tractors on steel wheels...because I'm too cheap to buy tires! |
Posted By: JimIA
Date Posted: 31 Jan 2018 at 12:49pm
|
How about the AC threshing machine in the back round????? ------------- An open eye is much more observant than an open mouth |
Posted By: CrestonM
Date Posted: 31 Jan 2018 at 1:16pm
| Anybody here get the tractor? |
Posted By: DaveWisc.
Date Posted: 31 Jan 2018 at 4:31pm
| Buy mine it runs and is in good shape. By the time you fix one of these you will have more than I want. |
Posted By: CrestonM
Date Posted: 31 Jan 2018 at 4:55pm
| Dave, if I had the extra funds and a place for it, I know I'd be interested! |
Posted By: orangereborn
Date Posted: 31 Jan 2018 at 11:51pm
https://www.auctiontime.com/listings/farm-equipment/auction-results/online/23536545/j-i-case-1945
 |
JimIA wrote:Posted By: JohnCO
Date Posted: 31 Jan 2018 at 11:53pm
|
Darn, forgot all about the sale until tonight. I would have paid more then that for it. Michael V, did you get it? ------------- "If at first you don't succeed, get a bigger hammer" Allis Express participant |
Posted By: JohnCO
Date Posted: 01 Feb 2018 at 12:11am
|
That thrashing machine was a bargain at $150. I wonder if the pick up attachment on top went with it?. I bought a very similar machine 25 some years ago, also for $150. It was the last one sold in Boulder County, sold new in the late 1940's. ------------- "If at first you don't succeed, get a bigger hammer" Allis Express participant |
Posted By: Michael V (NM)
Date Posted: 01 Feb 2018 at 9:52am
|
John,,, I didn't even bid on it...I really need to sell some things around here instead of buying more projects I'll never get to fixing... I have always wanted an "E",, I bid on one years ago at an auction close to me, just didn't have the money to buy back then..I think it went to MO..
|
Posted By: JimIA
Date Posted: 01 Feb 2018 at 10:15am
Well shoot. I thought the tailings looked square in the pictures but I was wrong! Jim ------------- An open eye is much more observant than an open mouth |
