Construction and other equipment - HD 11B rear axle oil seals

Print Page | Close Window

HD 11B rear axle oil seals

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14615
Printed Date: 27 Jul 2025 at 5:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD 11B rear axle oil seals

Posted By: Argo2
Subject: HD 11B rear axle oil seals
Date Posted: 02 Jul 2010 at 7:34am

Does any one have or know where I can get all the parts for the oil seal assembly behind the rear drive sprocket on a HD11B?

Replies:

Posted By: Coke-in-MN
Date Posted: 02 Jul 2010 at 8:20am

Might try Northern Tractor in Osseo MN.

Thill Track and Tractor in Eau Claire WI

http://www.thilltractor.com/ - http://www.thilltractor.com/

Another preson who posts under some other crawler posts is in Canada I believe also , look in some HD5 posts in this section and he is listed there mailto:gemdozer@hotmail.com - gemdozer@hotmail.com

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: Argo2
Date Posted: 02 Jul 2010 at 8:28am

Would you have a contact number? Do they have a web site? Not familiar with these places as I live in northern Canada. Thanks

Posted By: Coke-in-MN
Date Posted: 02 Jul 2010 at 9:31am

http://www.thilltractor.com/dismantled.htm - http://www.thilltractor.com/dismantled.htm

Their list says they have H3 up in AC machines to part out

Posted By: Kipn
Date Posted: 02 Jul 2010 at 10:02am

gemdozer is out of Montreal.

-------------
1961 H3

Posted By: Kcgrain
Date Posted: 02 Jul 2010 at 11:06am

I am not sure of the seal you are talking about, but Allis Chalmers was not big on using odd sized stuff, so you could probably take the old seal out and to a bearing shop, tractor dealer, automotive store and they could probably cross it for you.

Posted By: Coke-in-MN
Date Posted: 02 Jul 2010 at 11:43am

Unsure of the seal either but many AC seals were a bellows type seal that is totally different than a shaft seal most are familiar with. They glue into position and a spring loaded expansion type and not the closure type used on shafts.

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: gemdozer
Date Posted: 02 Jul 2010 at 3:24pm

I am still have some nice HD11 used bellow seal ass. (5 pieces)

Posted By: Diesel Smoke
Date Posted: 02 Jul 2010 at 8:34pm

NEED TO PURCHASE PARTS FOR ALLIS CHALMERS DOZERS ? ANY PART YOU NEED FOR THAT DOZER CAN BE PURCHASED FROM THE FOLLOWING COMPANY.
www.minnpar.com If you have a parts book and can give them the PART NUMBER THAT WILL MAKE IT EASY. IF YOUR A PRIVATE PARTY WANTING TO PURCHASE YOU WILL HAVE TO GO THROUGH ONE OF THERE DISTRIBUTORS. YOU CAN ALSO GO TO THERE WEB PAGE AND PUT IN THE PART NUMBER AND THEY WILL TELL YOU IF IT IS IN STOCK. tHEY MAKE PARTS FOR LOTS OF DIFFERENT CONSTRUCTION EQUIPMENT. THIS IS WHERE THE DEALERS GET THERE PARTS. WE OWN A HD-11EP THAT IS IN TOP SHAPE. HOPE THIS WORKS FOR YOU AS IT WORKS GREAT FOR US. GOOD LUCK !

Posted By: Diesel Smoke
Date Posted: 02 Jul 2010 at 8:38pm

PLEASE READ MY POST UNDER THE NAME OF ( DIESEL SMOKE.) THAT WILL GET YOU YOUR PARTS. NEED MORE HELP JUST CONTACT US..

GOOD LUCK, DIESEL SMOKE.

Posted By: Diesel Smoke
Date Posted: 03 Jul 2010 at 9:58am

ALLIS DOZER PARTS : HERE IS ANOTHER OLD TIME ALLIS DEALER WITH TONS OF PARTS.
                STEPHENS EQUIPMENT.    www.StephensEquipment.com
New & used Fiat - Allis Chalmers parts.     Ask for Albert Hodill.   Toll free number

        1-800-652-5547    Sarver, Pennsylvania    16055