Allis Pins ID
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=145287
Printed Date: 05 Apr 2026 at 12:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis Pins ID
Posted By: Dave (NE)
Subject: Allis Pins ID
Date Posted: 09 Dec 2017 at 3:26pm
What do these pins fit or go to? Found one cleaning Dad's stuff up, acquired the other at an auction last summer. They look kind of like they would be for a three-point top link mounting to an implement.   |
Replies:
Posted By: Ken McGregor
Date Posted: 09 Dec 2017 at 4:31pm
|
I'm thinking they were used for the "pin" hitches on the rear of the WD and CA before the Snap Coupler hitch appeared. We used to have a 2x14 plow on our WD that had a pin hitch and there were pins like those to hold the coupler on the arms of the hydraulic hitch. regards, Ken McGregor |
Posted By: Dave (NE)
Date Posted: 09 Dec 2017 at 5:09pm
| Ken, I know what you are talking about to connect the cultivator lift part to the tractor lift arms. Those pins are smaller in diameter and shorter than what these are. Dave |