Farm Equipment - Tilt Cylinder 500 Series Loader

Print Page | Close Window

Tilt Cylinder 500 Series Loader

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=145098
Printed Date: 18 Jul 2025 at 2:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Tilt Cylinder 500 Series Loader

Posted By: gjac185
Subject: Tilt Cylinder 500 Series Loader
Date Posted: 04 Dec 2017 at 9:55pm

Hi,

I have a 185 with a 500 series loader. Can someone tell me what the part number is for the rebuild/seal kit for the tilt cylinders on this series of loader?

Thanks in advance

Replies:

Posted By: Nathan (SD)
Date Posted: 05 Dec 2017 at 7:29am

http://www.allischalmers.com/forum/packing-kit-for-500-loader-hydraulic-cylinder_topic63727.html" rel="nofollow - http://www.allischalmers.com/forum/packing-kit-for-500-loader-hydraulic-cylinder_topic63727.html

Posted By: gjac185
Date Posted: 05 Dec 2017 at 7:39pm

Thanks, I saw that posting but I was unsure from the description if the lower cylinder was the same as the tilt cylinder. Thanks again for the clarification.

Posted By: SteveMaskey(MO)
Date Posted: 05 Dec 2017 at 7:52pm

I just go to Azdell Hydraulics in Mexico, MO and buy the Orings and wiper seal. Don’t need numbers just take old ones in and they will match them up. The seals and Orings are the same in both cylinders. This is much cheaper than buying kits

Posted By: orangereborn
Date Posted: 05 Dec 2017 at 8:05pm

gjac185 wrote:

Thanks, I saw that posting but I was unsure from the description if the lower cylinder was the same as the tilt cylinder. Thanks again for the clarification.

******I just talked to them today about those seal kits and they are $9.25 jobber and $12.xx resale. My loader takes the same kits for either cylinder. I usually have the individual items around but that is a fair price..Dale

Posted By: Doug-KS
Date Posted: 06 Dec 2017 at 6:59am

Are they the same for a 417 loader or are the cylinders different size?

Posted By: orangereborn
Date Posted: 06 Dec 2017 at 1:05pm

The Kits should all be the same. The tilt cylinders are the same except for the rods. The 500 series rods are about 9.5 inches longer. (and will have a tendency to bend easier) The ram barrels are the same. The 400 lift cylinders are about 40 inches and the 500 about 46 inches. (As I recall) Take the same kits as the tilt. I ordered some of the Baum kits today to see what they look like....Dale

Orangereborn
Dale Schafer

964 192nd Ave

New Richmond, WI 54017

715-247-3079

cell 715-781-2055 text

mailto:Orangereborn@hotmail.com" rel="nofollow - - Orangereborn@hotmail.com

Posted By: Doug-KS
Date Posted: 06 Dec 2017 at 1:31pm

Dale, Let me know how they look and how easy it is to replace them, and how they work. Thanks

Posted By: gjac185
Date Posted: 06 Dec 2017 at 7:13pm

Thanks guys, I ordered a kit from Baum also, just need to be able to take the cylinder apart. Any suggestions for a gland/pin wrench?