190 XT Series III lift assist
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=144525
Printed Date: 04 Apr 2026 at 8:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190 XT Series III lift assist
Posted By: AllisandGleaner
Subject: 190 XT Series III lift assist
Date Posted: 16 Nov 2017 at 6:23pm
| I just got in a 190 xt series 3 and I was looking at the 3pt hitch and noticed 2 extra cylinders on it. They bolt to the top some of the lift arms and bolt to the axel housings. Is this a factory option or what is it because now it has 4 lift cylinders? If I can I will try to post pics tomarrow. Any help would be great. |
Replies:
Posted By: KJCHRIS
Date Posted: 16 Nov 2017 at 6:37pm
|
Factory 3 pt. cylinders on a 100 series AC should pin on both top and bottom with 1" diameter pins. ------------- AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B, |
Posted By: AllisandGleaner
Date Posted: 16 Nov 2017 at 6:50pm
| It still has all the factory 3 pt lift on it the cylinders on the bottom are correct like my other 190s but these bolt on the top and when the one is extending on the bottom the one on top is contracting. All the brackets look factory and all have matching orange paint. |
Posted By: tbran
Date Posted: 16 Nov 2017 at 9:41pm
|
70252984 - search this # on agcopartsbooks.com The late XT and 200.s had an add on lift assist that bolted to your lift arm holes and anchored to the axle brackets that bolted to the axles. Rare option. ------------- When told "it's not the money,it's the principle", remember, it's always the money.. |
Posted By: AllisandGleaner
Date Posted: 17 Nov 2017 at 6:11am
| Thanks for the information I must have over looked it I'm my parts book the other day. When ever you say rare option how many are out there I haven't found any on the internet. |
Posted By: orangereborn
Date Posted: 17 Nov 2017 at 4:40pm
|
Posted By: Kevin in WA
Date Posted: 17 Nov 2017 at 6:56pm
| I have some of these parts NOS if any body is interested 360 201 5710 |
Posted By: ILGLEANER
Date Posted: 18 Nov 2017 at 3:58pm
|
I have a 190 with this option on it. ------------- Education doesn't make you smart, it makes you educated. |
Posted By: DougG
Date Posted: 19 Nov 2017 at 11:49am
| AH HAAAA, I have a 200 with these holes on the axle, always wondered about that |
Posted By: Eldon (WA)
Date Posted: 19 Nov 2017 at 2:24pm
|
I have a 190 with them also... ------------- ALLIS EXPRESS! This year: |
Posted By: JimWenigOH
Date Posted: 19 Nov 2017 at 3:52pm
|
Kyle/Eldon, Could you post or email some photos showing this option installed on your tractor. A couple months ago I posted a question regarding the 3 point lift capacity of a 190. I had some concerns about a toolbar setup I'm planning to make. Only info I could find was for the 200, so was thinking about this option for my project. Thanks. Jim
|
Posted By: Eldon (WA)
Date Posted: 19 Nov 2017 at 8:01pm
Email me at mailto:ejons@Comcast.net" rel="nofollow - ejons@Comcast.net and I will send what I have. I currently disconnected the cylinders and took the brackets off the lift arms as I wanted speed and not capacity. I would sell my setup for $500 if anyone is interested. ------------- ALLIS EXPRESS! This year: |
JimWenigOH wrote:Posted By: Joe(OH)
Date Posted: 19 Nov 2017 at 8:43pm
|
How much capacity does it add? ------------- Life is simpler when you plow around the stump. |
Posted By: Eldon (WA)
Date Posted: 19 Nov 2017 at 9:33pm
I would guess about 80-90% more since the cylinders appear to be about the same size, but they are pushing on the rod side, so you would have to subtract the surface area of the cylinder rod. I'm sure other physics are involved if you wanted to get technical.... ------------- ALLIS EXPRESS! This year: |
Posted By: JimWenigOH
Date Posted: 20 Nov 2017 at 5:51pm
| For those who have this mounted on their tractor, does the rear face of the platform have to be notched out for this setup to work? |