Need help on the 5030
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=144319
Printed Date: 21 May 2025 at 7:40am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Need help on the 5030
Posted By: bigcountry48
Subject: Need help on the 5030
Date Posted: 09 Nov 2017 at 8:50pm
|
I’ve been having trouble with getting my 5030 to steer right. Well I finally tore into it and found out what the problem was tonight. The spot where the steering worm goes through the steering post looks like it’s missing a bearing or bushing or something. Does anybody know where I can buy one of these? ------------- 1950 B, 1952 pulling wd, and 1954 wd45 |
Replies:
Posted By: Acdiesel
Date Posted: 09 Nov 2017 at 9:11pm
|
DO YOU HAVE A LOCAL AGCO DEALER? I WAS ABLE TO GET A STEERING CYLINDER REBUILD KIT FOR MY FATHER-IN-LAWS 5040 NOT THE SAME THING YOUR LOOKING FOR BUT I THINK THE DEALER MIGHT HELP. YOU COULD CHECK E-BAY FOR SOMETHING NEW/USED. IM IN OHIO AND MY AGCO DEALER IS NORTH CENTRAL AG- NEW LONDON OHIO, YOU COULD CALL THEM AND HAVE SOME THING SHIPPED TO YOU. ------------- D19 Diesel,D17 Diesel SER.3 2-D14, 2-D15 SER.II WF/NF D15 SER.2 DIESEL D12 SER.I, D10 Ser.II 2-720'S D21 Ser. II Gmc,caterpillar I'm a pharmacist (farm assist) with a PHD (post hole digger) |
Posted By: Gary Burnett
Date Posted: 10 Nov 2017 at 8:05am
Getting parts for a 5040 and a 5030 is a whole different thing.Fiat parts are eveywhere Toboshia (sp?) parts are few and far between. |
Acdiesel wrote:Posted By: DiyDave
Date Posted: 10 Nov 2017 at 5:43pm
toyosha engine, hinmoto tractor...
|
Posted By: Reindeer
Date Posted: 10 Nov 2017 at 7:13pm
|
The only place I have seen any parts for the Toyosha models (Hinomoto, Allis, Massey) was on this website. Not a recommendation, just noticed they list some stuff for them. https://www.stevenstractor.com/parts.html" rel="nofollow - https://www.stevenstractor.com/parts.html Might be worth a phone call.
------------- |