Farm Equipment - d-14 loader to wd45

Print Page | Close Window

d-14 loader to wd45

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=144291
Printed Date: 18 Aug 2025 at 9:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: d-14 loader to wd45

Posted By: jaybmiller
Subject: d-14 loader to wd45
Date Posted: 09 Nov 2017 at 5:53am

OK, anyone jnow what's involved in mountng a 140 trip loader onto a wd45, that came off a D-14. This loader is a rectanglular tube style not the round pipe version. Had a tag, pretty sure it said 140...though tht was 8 years ago...
Ed said he's interested, be nice he got it and NOT china !
thanks for any info.
jay

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Replies:

Posted By: Gary
Date Posted: 09 Nov 2017 at 3:20pm

Jay
It can be done,I remember my father doing it.

He had to use a piece of angle iron to lower the front nose of the side frames down about a foot or so.

The rear of the loader frame got attached to the rear axle housings.

Gary.