Farm Equipment - roto-baler spring installation

Print Page | Close Window

roto-baler spring installation

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=144200
Printed Date: 15 Dec 2025 at 10:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: roto-baler spring installation

Posted By: Michael V (NM)
Subject: roto-baler spring installation
Date Posted: 06 Nov 2017 at 11:29am

I got new springs from Agrimson,, there was a couple in question cause they were totally gone, and its kinda difficult to tell what goes where from the owner book..the first pic is on the twine arm

this pic of the trip lever/pickup drive

there are 5 springs the same and I think I have them all identified where they go

the small/really short compression spring goes on the brake band, but where do the other 2 compression springs go? their about 2 1/2" long and the same size diameter as the brake spring.

Replies:

Posted By: MACK
Date Posted: 06 Nov 2017 at 9:26pm

They go under the plungers in the arm of the roller. Adjust nut just enough to pull head into arm and slack out of spring. MACK

Posted By: CrestonM
Date Posted: 06 Nov 2017 at 9:28pm

Glad Gary was able to help you out, Michael! He's very knowledgeable on the balers.

If you haven't met him at Hutch, I'll introduce you. He's a great guy, and we wouldn't have field demos without him.