Farm Equipment - da 6265 brake bleed

Print Page | Close Window

da 6265 brake bleed

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=144148
Printed Date: 28 May 2025 at 8:09pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: da 6265 brake bleed

Posted By: cob_crusher
Subject: da 6265 brake bleed
Date Posted: 05 Nov 2017 at 7:31am

have deutz 6265 and o/h both master brake cylinders. they were 20 mm made by FAG and finally got correct o/h kit. this is a looped system (similiar master slave). i used mighty vac to pull fluid thru system. sequence was right master, right brake, left brake.

(left master has no bleeder). when i did left brake, i applied a little from right peddle and then did left foot peddle. results were left peddle ok but right was still spongy. in both peddles i get a small minute amount of air bubbles. i rechecked lines for leaks and tightened. i put grease around bleeder outside and am cracking bleeder and slowly depressing peddle, tightening bleeder and then slowly releasing peddle. any ideas how i can find where air is coming from ? thanks

-------------
ac 200 7080 653 da d90.06 6265 f400 ol 77 1650 jd 4230. the reward of suffering is experience. ignorance is bliss. no muff too tuff. i am only responsible for everything. free whiskey naked women.