Farm Equipment - WD45 Control Fork, need part or help

Print Page | Close Window

WD45 Control Fork, need part or help

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=143679
Printed Date: 22 Aug 2025 at 10:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD45 Control Fork, need part or help

Posted By: Penny220
Subject: WD45 Control Fork, need part or help
Date Posted: 21 Oct 2017 at 8:10am

According to the manual the part we are looking for is the control fork. It's where the draw bar attaches under the tractor. Does anyone know where we can find the part? Steiner says it's a salvage part only. OR...what other options do we have? Without it, the tractor is about useless.

Replies:

Posted By: DrAllis
Date Posted: 21 Oct 2017 at 9:03am

If it is the fork under the belly that the drawbar pulls from and is connected to the big coil spring, that would be a salvage only. I've never seen one broken. There will be THOUSANDS of them in salvage yards around the country.

Posted By: Matt (Jordan,MN)
Date Posted: 21 Oct 2017 at 2:18pm

I have 1 new and a few used. Send me a PM. Thanks matt

-------------
Owner of Matt Scott LLC
Specializing in NOS and used Allis Chalmers tractor & implement parts & liturature and Magneto Repair
http://www.mattscottllc.com/

Posted By: Lon(MN)
Date Posted: 22 Oct 2017 at 7:16am

If Matt can't help you, I have used. But I would go with the new one as there is wear in the hitch pin and also the pin that works the hydraulic pump for the traction boosted is sometimes broken.

Posted By: Gary
Date Posted: 22 Oct 2017 at 7:36am

According to the Allis Parts Catalog, that Fork is the same for both WD and WD-45.

Gary